Kyostar 102mm Black Throttle Body GM Gen III Ls1 Ls2 Ls3 Ls6 Ls7 Sx Ls 4 CNC Bolt Cable

Great to deal with! Great looking piece! And fit perfectly!

I put it on & everything works good, sensors work fine, vacuum port nipple is tight & doesn't leak, iac port isn't to whistley like other cheap china throttle bodys. Pretty nice quality for the $$$ I definitely would buy again

Quality looks great, has a nice fit and finish. The TPS sensor is a little cheap though. Going to see if I can put a better on it.

Yes it was worth it but their were problems the pressed in tube that the valve cover plugs into was very loose had a bad vacuumed leak had to fix that the Hole where the throttle cable goes into is too small you will need to drill it out slightly in the butterfly does lock up but you use the adjustment screw and it works very well if the metal tube wasn’t falling out and I didn’t have to fix it I would’ve given it a five

i installed this with a factory tbss intake on my lm7. i read the other reviews and put locktight on the butter fly screws. i got the package with the sensors and the entire thing was packaged very nicely. only issue is where to throttle cable end goes into the throttle lever. it was alittle tight. i ran a small file threw a couple times and no issues. there was also some rough edges inside the bore that i cleaned up and blew everything out. i did notice a slight whistle at idle. idk if thats from the throttle body or other parts i installed. didnt get to road test it since i developed a fuel leak. i will update this when that happens.UPDATED! the tps sensor was dead out of the box, and the iac was acting weird. replaced with my old ones and all the issues went away. i shouldnt have wasted money on buying with the sensors but at least the bolts look nice. also noticed the vacuum fitting for the crank case vent seems to have loosened up. i pulled it out and put some jb weld on it and slid it back in. besides that it seems ok. the return spring is alittle much and makes pressing the gas harder then the stock throttle body. not a big deal though.

nice part ,fits well,hopefully it works as good as it looks

Great quality and performance

This thing is sweet! Feels great I don’t see anything going wrong with this. Definitely worth the money.

Fais la job