Walnut Innovations Automatic Water Level Controller,Water Level Sensors (for Single Ph. Submersibles Operated by Starters)

Walnut Innovations Automatic Water Level Controller,Water Level Sensors (for Single Ph. Submersibles Operated by Starters)

Q: I have 1 HP - Two Stage Centrifugal Jet Pump. Which model water controller can I use?

HK-LLC-100-VSP you can connect to pump if it is only 1HP. This should work without any problems. I am using it to control 7.5 HP bore-well pump using this to power a relay which starts the pump and switches off when the pond is full (3 lac ltrs. capacity). This has been working for me for more than 9 months without any problems.hope this is helpful

Q: I have single phase Sub. water pump, what i want is just switch off the motor when water level reaches at its maximum predecided level only

sir, as i understand what you want is "you need only switch off the motor automatically but switch On manually". in this system you can do this by adjusting sensors position .

Q: Is there a current flowing in the sensor?are connecting eires supplied?how are sensors fixed in the tanks?how often the sensors need to be replaced?

No wires are supplied, you have to get 1 sq mm or 1.5 sq mm wire from market. You have to cut the wire and expose the wires and then just like Switches the wires needs be fixed in the sensors using the supplied screws. You need to hang the wires from a bar(Wooden or steel) inside the water tank.The three sensors needs to be in three position with varying hanging length inside the water(Overhead). I have not used the sensors for the the underground resoirver and have bypassed the circuit. I thinl very low voltage passes through the sensor , however have not see the water getting electrocuted.This is working fine at my house for last 8 months

Q: Motor and your set should on same time or they may be time gap to switch on your set

it will control your motor as same as human control, only different is it will do automatically as per tank lavels

3.7/5

Product ID: 102013086

Secure Transaction

💧6 sensors for precision

🔋Low power consumption

🛠️Durable ABS plastic

Frequently Bought Together

Walnut Innovations Automatic Water Level Controller,Water Level Sensors (for Single Ph. Submersibles Operated by Starters)

Microtail Fully Automatic Water Level Controller with Dry Run Protection with sensors.

IoTfiers Five Core Wire For Water Level Controller Or Water Level Indicator (20 Meters)

Description

💧 Dive into Smart Living with Walnut Innovations!

LED STATUS INDICATORS - Stay informed with clear LED indicators for motor status and water levels.
SMART WATER MANAGEMENT - Experience seamless automation with our advanced water level controller.
USER FRIENDLY INTERFACE - Easily toggle between auto, off, and manual modes for ultimate control.
CORROSION RESISTANT DESIGN - Built to last with specially molded sensors that resist wear and tear.
MAINTENANCE FREE OPERATION - Enjoy hassle-free performance with a system designed for longevity.

The Walnut Innovations Automatic Water Level Controller is a cutting-edge solution designed for single-phase submersible pumps. Featuring a robust ABS plastic body and high-grade PCB, this system includes six specially designed sensors for accurate water level detection. With a user-friendly toggle switch and LED indicators, it ensures efficient water management while being maintenance-free and corrosion-resistant.

Specifications

Brand	Walnut Innovations
Manufacturer	walnut Innovations
Country of Origin	India
Model number	water level 001
Colour	White
Special Feature	Durable Design, High Low LED Indication, Manual Bypass Mo0de, Automatic ON & OFF
Item Weight	700 g
Product Dimensions	15 x 12 x 8 cm; 700 g
Item model number	water level 001
Item Height	8 Centimeters
Item Width	12 Centimeters
Material Type	plastic
Are batteries included?	No

Have a Question? See What Others Asked

I have 1 HP - Two Stage Centrifugal Jet Pump. Which model water controller can I use?

I have single phase Sub. water pump, what i want is just switch off the motor when water level reaches at its maximum predecided level only

Is there a current flowing in the sensor?are connecting eires supplied?how are sensors fixed in the tanks?how often the sensors need to be replaced?

Motor and your set should on same time or they may be time gap to switch on your set

Common Questions

Trustpilot

TrustScore 4.5 | 7,300+ reviews

Ravi S.

I loved the variety of products available. Will definitely shop again.

2 months ago

Yusuf A.

Fantastic experience overall. Will recommend to friends and family.

1 month ago

View all Trustpilot reviews

Shop Global, Save with Desertcart

Value for Money

Competitive prices on a vast range of products

Shop Globally

Serving over 300 million shoppers across more than 200 countries

Enhanced Protection

Trusted payment options loved by worldwide shoppers

Customer Assurance

Trusted payment options loved by worldwide shoppers.

Desertcart App

Shop on the go, anytime, anywhere.

TT$753

Duties & taxes incl.

Trinidad and Tobagostore

Free Shipping

with PRO Membership

Free Returns

30 daysfor PRO membership users

15 dayswithout membership