Kwik Tite & Angle-On Wrench Kit

I had the other angle stop tool. Then I came across this. I like how it Rachets both ends. And it screws onto the stop. The other one just didn’t feel right. This model feels good in the hands a nice solid piece of equipment. Easy to use.

Well made and works great. Ratchet wrench fit perfect. Other tool screws in multiple treads for a good hold to loosen and tighten with wrench. Much easier than using crescent wrench and channel locks.

Perfect for work

The media could not be loaded.  Initial thoughts:These tools were built way better than I imagined. Very heavy duty and will last the rest of my lifetime doing property maintenance.Pros:- well made, no slack or wobble with the ratchet- like how they incorporated both sizes on the ratchet for the compression nuts- definitely better installs lining up valvesCons-- The threaded bar that holds the valve in place can be finicky starting on the threads. It's not the valve because the hose fittings have no trouble starting. Chased threads with a tap and it seems to start better now.- Ratchet will scratch the chrome finish on your shut off valves. See pic. The teeth are very sharp. It's like using a pipe wrench on the compression nut. Not sure I will continue to use the ratchet unless space restraints require it. I will probably use a smooth jaw pliers or crescent wrench.Conclusion:Had I know the ratchet scratched the chrome surface this much I may have just bought the threaded bar and saved some money using smooth jaw tools to tighten. But as a tool addict I'm ok adding it to the collection.

I have this and one other angle-stop remover tool (Ridgid One-Stop). Both work well. The couple items that makes this better than the One-Stop is the "handle" to hold the valve steady threads onto the 3/8" side nipple so there's no chance of "egging" the nipple (deforming it out of round). the "ratcheting wrench" also makes a quick job of removing and tightening the compression nut. I was able to knock out 10 valves at one stop quick and easy. Highly recommend this tool. Not to say I don't like the One-Stop.. they both work well and if you don't do this for a living and only have to do one every blue moon and want to save some $$, then go with the One-Stop. The biggest issue I have with the One-Stop is that the 5/8" semi-open box end never seems to fit well on the faucet connector nut.. usually too tight where I either can't get it on or struggle to get it off. A basic open-end would be better, which is the main reason I prefer this one a little bit more.

Good tool.to have for a plumbing jobs

I am a professional plumber working in single and multi family new construction. I purchased this tool because there are days where putting on compression angle stops might be one of my primary jobs and I wanted to be efficient as well as consistent with them. I used to just use adjustable wrench and pliers for the job as I tried the similar tool made for compression stops and didn’t like how it didn’t have much purchase point in my hand. But this thing really has worked well for me. It is a bit of a learning curve to get the feel for this but once I get going it really makes the job easy. I am confident in the connections I make with this wrench and it doesn’t hurt my hand to use it for half the day. I have had other coworkers try it and they are all super impressed as well and usually buy one of the own the same day. This really speeds up the process of installing stops and has a permanent slot in my tool bag.

As a professional plumber I tell you is a very well made tool and you appreciate its use when you are under a cabinet in tight spaces trying to replace a compression valve the only down side but it’s not much of a big deal is that the rod that helps you leverage by the threads only is able to do 3/8 not 1/4. But other than that little kink the tool is well made.

Works perfectly. I'm disappointed I didn't buy it sooner!

Es justo lo que buscaba para mis trabajos de plomería, so de gran ayuda. Llegaron en muy buen estado y más pronto de lo acordado.

I just received this product and did a quick test on an isolation valve. It fits perfectly and feels solid. I think it will last a long time. I'm a happy customer.

If you don’t have this tool for CR19 compression stops than you’re not doing it right!

Only good for R19s (angle stops). Pretty useless for R14s (straight stops). Larger than expected. Added weight in tool bag for nothing special