Attwood 17211-3 Drain Plug and Receiver Kit, ¾-Inch Diameter 1-Piece Plug, Threaded Receiver, Molded Black Plastic

The drain plug works great for my needs. Boat did not have a drain and this works well. Installed on aluminum boat.

Was super easy to install on my boat. I had to do a little work with a Dremel to flatten out the area on the stern a bit, but it dropped right in and now cleaning and draining my kayak is easy as can be now. I've had them for 7 years and have no idea why I haven't installed this sooner

My Hobie Revolution Kayak had one drain plug for the hull and it was on the very back and towards to top. I wanted a drain plug towards the bottom to allow draining while it is sitting right side up. This item was easy to install and includes a rugger gasket, but I also added a little silicone also to insure a good seal. My only issue with this item is it has more profile sticking out from the kayak than I would have preferred and would have loved it to have most of the profile on the inside of the kayak, but this works well either way. I am happy with this and I added one to front and back side of my kayak.

Added this to the rear of an Old Town Otter plus kayak that didnt' have a drain. I got the kayak as a secondary so my friends wouldn't have to rent/borrow to go on trips with me, and it was a very basic kayak (but cheap and stable). Added to the top just before the foam floats in the rear; it drains very well and easily. It does not drain all the water out, but that is bc I placed it high due to the foam packs. I solved the water issue with some car wash sponges under the seat to soak up what little water remains.Point is, it's a plastic drain. It seals well (I used marine sealant also), is easy to open/close, and was low priced. I do like the attached plug so that you won't lose it.

Installed these in my Quest Angler Pontoon boat and the main thing I didnt like about them was the screws did not tighten in the plastic hull. So I ended up using 3M 5200 Marine Adhesive and gobbed it all around it. Hopefully they wont leak. I would recommend not using the screws that came with the plug and use tiny bolts or maybe a coarser screw.

Works as advertised.

I was looking for a small drain plug for my 12ft aluminum boat, it had no drain plug so water would just collect at the bottom very fast. This plug worked great and after using it for a year, I do wish it was a bit bigger so that leaves didn't plug it easily. I might just remove the parts that keeps it from being removed completely to allow more draining. I knew the size and went for it, I am happy with it as it does what it was meant to.Construction, very strong and sturdy, no problem of it moving or bending as it's screwed in.It's a plastic drain, it does what you need it to do, make sure you understand its size before buying, get some good marine sealant and the job should be easy.

I bought this for my Pelican Trailblazer 100 after I lost the rubber stopper it came with. I did have to modify the plug to get it to fit in the recessed port and also had to widen the drain hole on the kayak, but with some silicone its in place, looks great, and drains fine. I like that the plug stays attached so it can't get lost.

Fit perfectley as a replacement for my 2008 Seadoo Challanger Wake 230 boat.

Did exactly what it was supposed to.

This kit fit perfectly. the product was described accurately and shipping was quick.

Added drain plugs to my WJ500. Good after market product with gasket and screws.