Microsoft Xbox 360 (Slim) Disc Drive Replacement/Xbox 360 Slim DVD Drive with Laser - Phillips Liteon (DG-16D4S: 9504) T8 Screwdriver

Product works great, but just know that you will likely need to solder a couple pins to swap the board from the original console disc drive otherwise the console will not read disks with it. This is not a problem with the disc drive. The drive is awesome and all my games work now. I got this console super cheap and all it took was this drive to fix it. I installed it on a 360 S.

My xbox 360 slim had the unreconized disc problem. It would open and close door fine but wouldn't read disc. Every review said you have to flash software or need to solder old board to new drive. Not the case. Just switch the new disc motor chassis (in picture) to old CD drive. The wires that are soldered on only connect to the motor that opens door. See second picture. Mine works perfect now.

Absolutely sucks. Do not buy.

Product high quality , everything great, you must to know :Take old board from old disk drive and put it to the new one and must have experience for desoldering and solderingThe disk drive not working if you don't take original board

What I learned later is that you can't just buy a new drive for Xbox. One that comes with it is "married" to motherboard or whatever. May need further programming. Won't work right out of box. I had mechanical issues, so what I did was transfer parts from new one to old one.

This product worked perfectly. It does require some soldering to get it working, as the motherboard inside the xbox works only with the original board inside the original disk drive (they are "married"), but the soldering was not difficult to do, and I was able to fix my xbox within 30 minutes of opening the new disk drive. Well done, Nextec.

The screwdriver was worthless for the task, it did not fit a single screw that needed to be removed and replaced. The dvd driver however was great. I am not one who works on motherboards or even sure if that is what it is called, but after buying a cheap sauder kit and replacing the old with the new, the Xbox 360 worked great. So if you have broken you dvd driver on your 360, this will work with a bit of effort on your end to replace it, and you get a screwdriver that may help with some task in the future.

Our old Xbox Slim got to where it wouldn't play any discs. After looking online for possible solutions we discovered we probably needed to replace the drive. This worked for us, it fixed our old Xbox Slim. My husband didn't have the flash software to just flash it over to the old one, so he needed to solder it on. Just a delicate touch with my help and we had it on in no time. The only concern he had was whether our old board was any good or not because he didn't' have the means to check so we took a chance buying this not knowing for sure if we had a different problem. We actually bought the wrong one first, b/c he didn't check to see if we had a slim. We did of course, and had to figure out why it didn't work. Upon closer inspection, he discovered we needed to buy the drive that was made for the slim. So learn from our mistake and check which one you've got first. Quick delivery and good service.

En lieu est place du lecteur d origineFonctionne parfaitement

lettore esattamente uguale a quello che era installato nella mia xbox, ottimo l'imballo ed i tempi di consegna, ricordatevi però che non basta sostituire il lettore per far funzionare di nuovo i giochi, bisogna rimuovere l'elettronica del vecchio lettore e montarla in questo nuovo (oppure se avete backuppato il firmware del vecchio lettore prima che si rompesse dovete flasharlo sopra quello nuovo) è molto semplice si tolgono 4 viti e si fanno 4 saldature ma lo segnalo xchè molti non sanno che scheda madre ed elettronica del lettore xbox sono accoppiati quindi se sostituite solo il lettore così com'è l'xbox leggerà solo i film ed i cd audio ma non i giochi.

This product came looking like new if I'm honest and with a T10 screwdriver which saved me finding mine! The product worked just fine and is excellent value for money, it certainly saved me having to throw out my daughter's Xbox 360 so I hope she;ll keep her disks cleaner in future! You sometimes have to flash the PCB or you can just do the easy bit and swap from old to new and this takes no more than five minutes with a tiny phillips head screwdriver (I'd recommend the latter or you'll need additional equipment). Plugged it in, reads disks quietly and quickly worked straight away - would recommend this if your Xbox DVD has given up the ghost.

Purtroppo non funziona, ma avendolo smontato per sostituire la lente non posso nemmeno restituirlo.

Brilliant worked perfectly with my slim console. i had the G-16D5S but the G-16D4S works exactly the same but slightly smaller, screwdriver is good quality as well. Remember to swap your circuit board with this one to get it working with your console.