Dorman 919-237 Stainless Steel Brake Line Kit Compatible with Select Jeep Models (OE FIX)

Easy to install

Great value, fast delivery, far better than the old regular steel brake lines

These are good looking strong brake lnes. Two of these are difficult to install. Take your time and unbend them as instructed. I recommend you watch a you tube video if you have never done this before. Take your time and go slow and you will not kink or break your lines. The line that goes from driver side and runs under the fron bumper is the worst one to install. I recommend you removed the Jeep bumper cover and support bar. This makes iw way easier to manipulate the new line in place. The long run from front to back rear driver weel is suprisingly not too hard. You might not be able to put the line exactly back the way it ran before. if you unsnap all the other metal lined in the CLIPS you might be able to manipulate the new brake line inbetween the other steel lines. I did not remove the skid plate as i had plenty of clearance to move the line through. I fed from FRONT to the REAR. Getting it through the frame and over / through to axle was time consuming. I recommend you do this when you have at least 3-4 hours to dedicate. I did it in multiple 1 hour or so sessions.

very pleased easy installation with 2 people

I've installed all but one (proportioner value to rear axle) of the brake lines in this kit on an 87 Wrangler whose brake lines needed a little love. The packaging was excellent; they've got a good system down of putting long, gradual bends in the longer lines with stickers to mark where to unbend at. Everything has fit 100% perfectly so far. As far as ease of install, a couple of the lines are a bit tricky and take a little time to route, but to no fault of the line manufacturer.

Worked great!

I put these on my 1989 Jeep Wrangler. The brake lines were very close in length and shape. Some previously mentioned they were not close but they may never have experienced making lines from scratch. Cutting, shaping and flaring takes a ton of time when making lines yourself. This is not an easy job and will take several hours to finish. Great product!! The stainless steel is a great upgrade. Keep up the great work!!!

It’s not a question of if you are ever going to need to replace the brake lines on your older jeep but wet. These are an excellent fit and relatively easy to work with.