Ram 1500 2009-2018 2wd 4wd Rear Coil spring kit 50% Heavier TTC-1211

Installed these on my 2016 Ram 1500 that was purchased new. The original coils were always soft and have gotten worse after 7 years and 203,000 miles. These springs made the truck ride a lot stiffer and able to handle the load much better. Should've done this the day I bought the truck.

Perfect fit and best of all these babies put my Ram back to the original height! Excellent springs!

Installed on a 2021 ram 1500 classic. I didn't realize I would need almost 12 inches in addition to the max height of my floor jack to get the clearance needed to do the swap myself. Once I figured that out it was smooth sailing. Love how it rides and and handles now. It did raise wheel well height about 1.5 inches. Before the swap if I (200lbs) sat on the tailgate the truck would drop about 1.5 inches measured at rear wheel wheel. With the new springs 200lbs on the tailgate drops the truck .75 inches measured at the same spot.. would absolutely recommend. All I needed was some concrete patio blocks to stack for additional height under jack to lift the body. A 15mm socket to remove 2 sway bar bolts per side, and 21mm wrench and socket to remove single bottom shock bolt on each side.

Put my Dodge Ram 1500 up on a lift and it was an easy job to replace the old springs with the Tufttruck springs .Took an hour to replace the springs . With Old OEM springs truck was lowered by 3 inches when hooked up to Toy Hauler .After installing Tufttruck springs rear of truck lowered only 1.5 inches when hooked up to Toy Hauler . they do the Job . Have large rubber Bump Stops over axle on each side so could only go with a heavier coil Spring . Have about 500 to 700 lbs for weight on toy hauler hitch . changed shocks also .new springs have the same height as old ones so does not raise truck any .

I added these, and Load Lifter air bags to my Ram half ton and wow what a difference! I'm towing a 6,600lb boat and the difference is night and day. The only downside is you do get a little tougher ride when not towing anything.

I got these springs because I have a RAM 1500 that does not have the largest payload capacity and the 34' travel trailer I have was pushing me over. I also have the AirLift HD helper air bags and was able to pull them out of the old springs and add them to these. After install I tested the springs and air bags at 45PSI without WD hitch to see how much sag happened. While the weight of the trailer still causes sag it makes it even with the stock front height so there is no V sag going on. When I use the WD hitch I see no sag and can maintain stock ride heights.Install is not that hard if you have the right size sockets and other needed tools to change them out. It took me about an hour and most of that was jacking the truck up and fighting with the Air bags to get them out of the old springs.Overall I am happy with the springs and this should allow me to continue to keep my RAM 1500 a little longer and not have to upgrade to a 2500/3500. Note I also upgraded the rear shocks, sway bar, and sway bar links to hopefully make the truck safer when towing.

I would highly recommend these for anyone with a 4th gen ram 1500! Haven’t hauled or towed with them, just got them in about an hour ago but even the difference riding empty is worth it. Just do it.

2017 Ram 1500 tradesman quad cab 4x4 took about 4 hours no hurry. The rear height raised 1/2” at wheel well. I can’t feel any ride difference as in stiffness. Haven’t towed my 20’ trailer 4500 lb pretty sure it’ll be much better.

quite literally made my 1500 just as capable as my 2500 (except for maybe the legal limitations), was surprised by the performance of these, installation was super easy all you need is a floor jack. these paired with Timbren bump stops and coil airbags really make any load a joke, am super impressed and highly recommend that combo. my 1500 squatted less with the same load as a 3500 with that combo(TUFTRUCK coils, TIMBREN bump stop, and AirLift coil bags), It is not safe to tow that much with 1500 as the suspension can only bring you so far when your frame is simply not as strong as 3500, but just thought id test how much it squatted in comparison to a buddies stock 3500 with the same load for refrence, was super impressed

Installed on my 2017 Ram 1500 and worked out perfectly. I did add 1.5" spacers for a little more ride height.

100lbs fiber cap + two ebikes in bed pulling a 5000lbs travel trailer with 600lbs tongue weight. Works very well and absolutely no need for suspension helpers. A little firm but nowhere near a 2500. Very comfortable.

great fit easy to install didnt give the ride height exactly as stated did get little lift but def do what they are made to do my truck barely squats with load on it and much better control with load on it and def 50 percent increase very happy

U figured for the price I would try them out. Easy install. Shocked how fast they came. After installed drove around nice ride. Truck only sat about 1/2inch higher from before install