UTG 5-Slot QD Lever Mount Adaptor and Riser, Medium Profile , Black

This UTG 5-Slot Universal Quick Disconnect Lever Lock Adapter and Riser is the bomb. Now I can install or remove, pretty much any accessory I want to use with it, in seconds instead of minutes. I am presently using mine to hold my SigTac CP-1 scope into place effortlessly. It will really pay off when its time to protect the scope by simply flipping a single lever, and pulling the scope off, prior to cleaning my AR15 after a long day at the range. Very well made, great fit, and the lever is super to easy adjust with an enclosed allen wrench, to get just the right clamping pressure to hold your accessory snug and tight. It's not too long so as to take up too much space once it's mounted. Raises the scope about .5 inches for easier target acquisition. I am very pleased with this purchase, and will inform all my friends and family, just how great this mount riser is. You can't go wrong for under $20.00.

I bought this for my custom built AR-15 SBR to raise a Primary Arms Red Dot Sight. When I bought my RDS, it had such a low-profile base/mount that it was awkard, unnatural, and uncomfortable to look through, I found the UTG 5-Slot QD Riser (medium profile) and it worked wonders! The UTG QD Riser brought my Primary Arms RDS to a perfect, natural, and comfortable height for my needs that I am happy with. I am not co-witnessing with this riser, but you could do so depending on your optics/RDS height and iron sights. Keep in mind this is just a QD riser, not a dovetail mount. After several hundreds rounds fired and 3 removals of the QD riser and re-attachments, my site is still zeroed in while being on the UTG QD Riser. It's a quality product that doesn't weigh too much (3 oz), the riser has a length of approx. 2.25" long and a height of approx .75". It fit perfectly on my Side Charging Upper with a standard 1913 picatinny rail. Overall I would highly recommend it. -------------------------------- FAQs -------------------------------- Q: How long is the riser? A: Approx 2.25"-2.3". Q: How tall is the riser? A: Approx .75" (3/4"). Q: How much does the riser weigh? A: Approx 3oz. Q: Is this Absolute Co-witness? A: Depends on your optic height and if you are using any other mounts. Q: Does this fit a 20mm rail? A: Yes, it fits a standard 1913 picatinny rail. Q: Will this handle the .223 Remmington or 5.56mm recoil? A: Yes, I have shot both .223 and 5.56mm ammo (hundreds upon hundreds of rounds) with no issues. Q: If a RDS is mounted, and you detach and re-attached will the RDS hold zero? A: Yes, as long as you've mounted on the same firearm. Q: Will this attached to a weaver base? A: Yes Q: How much will this riser raise iron sights? A: About .5" (1/2").

Nice Riser, UTG makes decent risers, the QD mount works great, adjustable with a hex wrench included. locks tight. great for adding a reflex for CO-Witnessing. Easy on easy off. It could be cut lighter, but its not bad at all. good buy.

This QD low rise rail is well constructed, sturdy, medal, and is at a great price. I need one for my leapers golden image 38mm red/green dot sight to co-witness my iron sights on a AR15 and It works great, its the perfect length for my sight too! After a few measurements and a millimeter to inches conversion table I decided on the low rise. it came as described by seller and even came a few days early. I would recommend this to anyone.

Love it, love it, love it! This item is excellent for red/green dot sights that need to be raised to eye level. I recently purchased a new generation UTG red/green dot sight system for my AR-15 platform and needed a riser that would also allow the sight to become quick detachable. This product meets all those needs for me and more. Not only does this riser bring the optic to the eye level without messing up the alignment of the sight with the bore but it also makes the sight easier to put on the rifle and take off at the same time. The quick release lever works well and can be adjusted to fit your needs as a shooter. I know this riser has 5 slots which will fit most red/green dots but just ensure you have 30 days to return the product in case it does not work out for your particular set up. It fit my UTG optic just fine and has made it very easy to both use and detach from the rifle. After using the rifle to run 'n' gun a couple times the red/green dot did hold zero so this riser is pretty tough to take the recoil from a .223/5.56 centerfire rifle. Not sure how it would perform with 30 caliber but it's all aluminum/aluminium so it should have no problems. All in all, a great product that is highly recommended!

Have 3 of these and so far they have been great. I don't beat on them but they have been sturdy enough at the range. Have taken them off and back on with pretty much return to zero. May need slight adjustment but not bad.

This IS NOT the UTG, but the Chinese knock off. Quality looks OK, but the clamping design IS different. Still usable and cheaper than most, but it took FOREVER to get here just to find out it AIN'T the UTG Brand !!!

great riser, works great for my red dot reflex sight. After putting little over 200 rounds through it, it seems to stay tightened. after taken it off and on around 6 times, it feels the lever loosened a bit. The wrench that it came with did't actually fit the lever nut, but I have my own tools for everything so I have one that works so no biggie.

Matériels de bonne qualités,pratique pour désassemblé sans dérégler,seul problème pièces vendu trop chères , j'ai découvert un magasin à la périphérie de Paris spécialisé dans les articles militaires et polices. en fin de compte,parfois on trouve moins chère (il faut parfois chercher). cet article est deux fois moins coûteux en France. donc soyez prudent car parfois l' importation est parfois plus chère. désolé,mais mon commentaire est tranchant mais honnête.

Top Ware

Top Weaver! Die Verriegelung ist fest und bleibt es auch . Die Verarbeitung ist auch super. Mit einem imbus kann man die Verriegelung noch weiter zu drehen so das man sie nicht mehr auf bekommt. Also halt alles bombenfest. Super Preis Leistung. Kann ich nur weiter empfehlen

Gewicht ist ein Faktor wenn man etwas auf seiner AR montieren will, dieser QD Mount ist sehr stabil jedoch wiegt der für meinen Geschmack im vergleich zu anderen deutlich mehr.

Eine Vergleichbare Schiene kostet beim Waffenhändler ums eck 75€ aufwärts. Verarbeitung in Passgenauigkeit ist 1A. Auch nach mehreren 100 Schuss sieht die Schiene noch Bombenfest.