2-cb1106e2e21969f3.js","9888","static/chunks/9888-d48720c0d3cecfaf.js","1623","static/chunks/1623-8f9c42c74ef44b22.js","9678","static/chunks/9678-bc3175fdc66b489e.js","8275","static/chunks/8275-bc0cd43a5d16c2eb.js","8556","static/chunks/8556-0661fc57cf5e861e.js","1801","static/chunks/1801-ff2957ded3b42991.js","2177","static/chunks/2177-75a725a1c0a3636f.js","2450","static/chunks/2450-2af1615d1ec02554.js","3690","static/chunks/3690-d6ce99b634a3c6d6.js","6849","static/chunks/6849-a5aa65d17e203de5.js","298","static/chunks/298-222bf2d33590277a.js","7820","static/chunks/7820-25836c09109f5f87.js","686","static/chunks/686-da86c4d4102875ea.js","2755","static/chunks/app/%5Bdomain%5D/%5Blang%5D/(main)/products/%5BproductIdTitle%5D/page-314adcde2f47373d.js"],"default"] 35:T6b0,

How to Use
First, make sure that the end of the tubing is open and that you do not have a bottle filler or other valve attached that may be blocking the flow. During the transfer process, if there is any distraction, it will be hard for the water to flow again. Connect one end of the tubing to the inside of the pump. Please make sure during the entire process, the tube should remain standing vertically at 90 degrees.
Then, with the racking cane pulled up to the top of the auto-siphon, insert the siphon into your container. Setup your intake vessel at a lower level than the container you are transferring the liquid from. The open end of the tubing should not be blocked by anything. Also, the liquid source should be full. The liquid level should be as high as the tubing.
The liquid should automatically begin filling up in the body of the siphon. Then, push down the racking all way to push the liquid up the racking cane. This may take 2 or 3 more full pumps to get enough volume to begin filling the tubing and get the siphon started. Once you get the air out of the line, the liquid will begin flowing on its own.
Do