🛠️ Seal the deal with precision and durability!
The Edelmann 70005 Replacement Teflon Seals are high-quality PTFE seals designed specifically for 16mm Type III power steering fittings. Each seal measures 0.56 inches in inside diameter and 0.045 inches in width, offering a perfect fit and reliable leak prevention. The seals soften when warmed, simplifying installation, and come in a convenient 25-pack, making them ideal for professionals and enthusiasts alike. Manufactured in the USA, these durable seals ensure long-lasting performance in demanding automotive environments.
| Material | Polytetrafluoroethylene (PTFE) |
| Nominal Inside Diameter | 0.56 Inches |
| Item Diameter | 0.56 Inches |
| Brand | Plews |
| Color | White |
| Temperature Range | 1E+2 Degrees Celsius |
| UPC | 021597700050 |
| Manufacturer | Edelmann |
| Unit Count | 25.0 Count |
| Global Trade Identification Number | 00021597700050 |
| Number of Pieces | 25 |
| Model | Seals |
| Item Weight | 1.44 ounces |
| Country of Origin | USA |
| Item model number | 70005 |
| Exterior | Machined |
| Manufacturer Part Number | 70005 |
K**E
Works and oem
Used these on my 2009 ford focus. Its a great value for the pack since these are 4-5$ at an auto zone store. Quality seems good and i am happy with my purchase. Dont forget the install tool.
T**R
Good price
Easy to put on with a little lube you have to stretch it a little
C**N
It's what you need. But do you need 25?
So a 25 pack is just a slight cost difference from a single seal. So now I have 25 seals for a repair I'll probably do once in my life. Guess that's a good value?
R**S
These work great on the FORD High Pressure Power Steering hoses
Heat them up in a cup of hot water (I put y water and cup in the microwave for about 4 minutes) then carefully stretch over the tube of a funnel. Quickly install then on the hose fitting, then reshape then by pushing in on them to the fitting. Let them set for a little bit before installing the line fitting together to make sure they have shrunk back down to the proper size.
M**E
Just what I needed
I'm not sure what was going on with the seals from autozone, but I tried 3 on an F-150 power steering pump and all 3 became out of round in the tightening process making them not seal. At the end of my ropes I decided to order these. I figured I'd have plenty of chances for it to align properly.I didn't even need that many though. I could tell right out of the package they were a stiffer and better quality. The first one went on and held its shape all on the first go around.THESE THINGS ARE AWESOME!
-**-
Wasted half a day because of these poor quality seals
I had to put a new seal on the high pressure power steering line of my 1993 Ford Thunderbird so I bought this pack of seals. Incidentally, the line was also an Edelmann product. Even though I used the correct tool (two different types, in fact) to install the seal over the threads of the fitting, the seals would NOT shrink back down enough, and as a result would just get pinched when threading the fitting in.Maybe these are just a bad batch of seals, or perhaps were improperly stored (ruining the elasticity of the Teflon material they are made out of) but they were totally unusable, causing a LOT of frustration and wasted hours of my life I'll never get back.
R**
Always nice to have spares 😊
For the price you get them for can't beat it have broken a few putting them on and to have extra on hand is always nice and like I said for the price and the amount you get can't beat it
S**D
Good quality, good value
Good quality, better than the dorman ones at the parts store. Make sure you study how to install these.What I did was take a long funnel, marked the pointat which it reached 16mm. I then hot water soaked the washer and slid it up the funnel to stretch it to 16mm. It then just barely fit over the line fitting, had to carefully work it over each thread. After letting it sit overnight, it contracted down to the fitting pretty well.
Trustpilot
1 month ago
1 day ago
