Full description not available
E**.
Easy to cut and solder, but I used a different PSU to avoid overloading the included one.
These work great, I bought a 12V 2A supply and only used 2 strips together, then used the included 1A supply for the other strip elsewhere, then I cut them up and soldered them together where I needed them with some 2 core wire, dimmer works well. The other strip is wired up to a bathroom pull cord in a wardrobe, works well.
M**K
Fantastic for the cost
Very sticky if surface cleaned with alcohol wipes 1st.
M**T
‘Mood lighting’ and easy to install
I bought the 15m kit (3x5m rolls) to add ‘mood lighting’ to my conservatory after having had the roof replaced with a tiled one. Each 5m strip has a connector on each end to connect it to the next strip. The method of connecting the 5m strips together would have been better with shorter wires on the ends of the strips but it’s no big deal as in my application as it was easy to hide them. Ideally it would come in one continuous roll, which you can convert it into if you are OK with a soldering iron. The strips can be cut every 10cm so it’s easy, compared to many others, to get the exact length you need. The strips have a sticky back which I found to bond very well to the rear of the blind rails. The rotary dimmer control is easy to operate from off tofull brightness. The brightness of the leds was perfect for my application however they are not bright enough to be the only method of lighting the room. I have them on a timer. The connectors are standard 5.5/2.1 12v power supply male/female connectors and you can buy extensions easily if, as in my case, the distance from the rotary dimmer to the nearest power outlet is longer than the 1.5m lead it comes with. The led strips are very thin and flexible and I had no problems bending and folding them to the angles required around the roofline. I am very pleased with the results - hopefully they will last a long time.
K**D
Good led lights
Great product works really well and easy to install but only downside is that the adhesive surface is not great as it kept coming off and needed extra glue to keep it attached
A**R
Excellent
Used this to uplight my ceiling and it's great ,very easy to use.
C**E
Not sticky at all
lights work well and dimmer switch is great but the adhesive is absolutely useless. i’ve had to buy extra double-sides pads to keep it stuck to standard one. these replaced another set of LED strips which stuck perfectly to the same surface.
S**.
Really flexible
The media could not be loaded. These strips are really flexible. You can cut them half way along, join all 3 together if you want, dim them, stick them wherever you want, mount them in channel, use the clips provided. So many options! They are a nice warm white and plenty bright enough on full brightness. The sticky pad on the back is continuous and holds really well. One slight downside is that where you join two strips together there's a gap because there's a wire and plug in between the sections. This might be an issue for some but it's fine where I'm going to put them.
L**L
Bargain lighting
A bargain. I needed approx 1 of warm white led strip of a recess around dropped ceiling and couldn’t get better for the money.To be fair I had to buy a driver to fit between mains light ring and strip (so binned off the plug in adapter). But that was just another £10. Result are great.
Trustpilot
1 month ago
3 weeks ago