🔩 Split logs like a pro with precision and power!
The RuggedMade 11 GPM 2 Stage Hydraulic Log Splitter Pump is engineered for efficiency, boasting a powerful 11 GPM flow rate and a robust 3000 PSI pressure rating. Designed for compatibility with 5 to 35-ton log splitters, this pump features a 1/2" shaft diameter and a 1.375" shaft length, ensuring a perfect fit for your needs. With a lightweight design of just 8 pounds and compact dimensions, it's the ultimate tool for any serious woodworker.
| Manufacturer | RuggedMade |
| Item Weight | 8 pounds |
| Package Dimensions | 10 x 7 x 5 inches |
| Is Discontinued By Manufacturer | No |
| Item Package Quantity | 1 |
| Flow Rate | 11 Gallons Per Minute |
| Batteries Included? | No |
| Batteries Required? | No |
K**N
It worked perfectly
We bought a used wood splitter that needed a motor. After installing it worked like a new one.
B**H
Well made
Replaced pump on 20 ton mtd splitter. Perfect fitment. Seems very well made. Exceeded expectations.
T**N
Works as advertised. Note that the inlet barb is 1 inch. Original equipment inlet barb was 3/4 inch
Pump was installed on a log splitter. Pump works as advertised. Note that the inlet barb on this unit is 1 inch diameter. The original equipment inlet barb was 3/4 inch, so I needed to get an adapter, found at my local auto parts store. Drive shaft was slightly longer than the OEM pump shaft, so the lovejoy connector had to be seated deeper on the motor side.Note: if you are working on a log splitter, you might want to take this opportunity to install a full flow ball valve between your hydraulic fluid reservoir and your oil filter, so you can shut off the reservoir and change out filters (and if need be replace your pump again) without having to drain out 5 gallons of hydraulic fluid. Just a thought!Installing the ball valve: you will need 2 3/4 inch close nipples and a 3/4 inch ball valve, and teflon tape for the threads. I used tape rated for black pipe and gas. You may have to adjust the length of your inlet hose as well.
A**R
Figured out that the old pump is still good. Check the slot for the keyway
This pump is working well after 4 ricks of wood. Figured out that the old pump is still good. Check the slot for the keyway. May have slipped on the coupling. This pump only has a half moon keyway where as some others are full keyway. Keep an eye on the set screw on the keyway and reset it with locktight every few months
D**E
Worked well for about 1 cord
Threads blew out after about a cord worth of splitting. Good pump other than aluminum housing.
A**R
it does what it is supposed to do
this pump works great on a Troy-Bilt log splitter but you will have to get an NPT adapter because the Troy-Bilt fitting That goes to the high pressure outlet is not NPT. You can get the adapter at any Hydraulic store.
D**.
It works well for this conversion.
Switched from a vertical engine and belt drive on a swisher splitter to a horizontal engine and direct drive with this pump. Other pump ccw needed this cw pump to work on direct drive. Split three pickup loads of red oak with it so far with a cross blade adapter. No leaks no hesitation! Very pleased! Good price! (Used a 6.5 hp engine.) Received it in 2 days.
C**S
Pump
Good pump but not happy with only a half moon key way. Weak point in product.
Trustpilot
2 months ago
2 months ago