Epoxy Floor Kit – Good Full Kit – Gray Base with Gray Blend Flakes – Covers 500 sq. ft. at 9.7 mils Thickness – Ideal for Garage, Basement, Concrete Floors, and More

I did a month of research before committing to this kit. You will spend twice the price on this kit compared to the ones in the big box home improvement stores but it is worth the investment. This is a high quality epoxy rated for 20+ years. if you get a cheaper kit you will see it wear off and flake in a few short years. Those kits contain water sometimes and this kit is 100% epoxy.The kit comes with just about everything you need. In addition, I would recommend:Paint roller, shoes you will throw away, plastic mat or dedicated area to mix, drill to attach to the included mixing attachment, and gloves.The seller is great. She was very accommodating and allowed me to pick my own color flake chips.Installation took about 4 hours by myself. I did not need to grind the concrete as it was a new house and didn't have any stains or residue on it. I did the acid wash that comes with the kit though which preps the surface.Everyone comments about how great the floor looks. It's easy on the feet and a breeze to clean up.1 year update:We are approaching one year with my floor being installed. I continue to be impressed. There is no peeling or wear anywhere on the floor. We park the cars on it every day. I have spilled oil on it and other chemicals, but they all wipe up like water. There is not even a stain where the oil was. I have even waited a couple weeks with oil on the floor before cleaning it up, it wiped right up. If there is one thing i regret, it's using the optional gripping salt that comes with the kit. It gives the floor some grab when you're walking on it, but it makes it a little harder to clean, kinda like wiping a fine grain sandpaper.-----Two and a half years later, there is no peeling or staining. Very easy to clean! Still extremely satisfied!

Applied using squeegee and coats well. However, coverage is thick and reduces actual overall coverage. I will try to buy an additional 3 gallons with just epoxy and not the kit.

I had previously used an epoxy coating from a reputable company I got at a big box hardware store. Just didn't hold up well. THIS PRODUCT IS SO MUCH BETTER THAN THE OTHER I USED. I had gotten the impression that the working time for this would be faster than the previous PRODUCT which might make installation difficult, but I had no problems at all. Like any paint job, it's the preparation that is the hard part. Laying this down was easy, and it has held up very well

I did a month of research before committing to this kit. You will spend twice the price on this kit compared to the ones in the big box home improvement stores but it is worth the investment. This is a high quality epoxy rated for 20+ years. if you get a cheaper kit you will see it wear off and flake in a few short years. Those kits contain water sometimes and this kit is 100% epoxy.The kit comes with just about everything you need. In addition, I would recommend:Paint roller and a dedicated area to mix, drill to attach to the included mixing attachment.Installation took about 2.5 hours by myself. I did not need to grind the concrete as it was a new house and didn't have any stains or residue on it. I did the acid wash that comes with the kit though which preps the surface.

The media could not be loaded. Ordered this product to use in our old 1950s basement. Wanted to make the space more useable. There is a lot of prep work to make this product work correctly but the finished product is amazing! Only thing I would be cautious of is not ordering enough. If your floors have heavy use and are less than perfectly smooth, you go through a lot more of this product. This basement is 525 square feet and I ended up using two 500 square foot kits. When I ran out of product, I didn’t have a second kit. The two kits blended together perfectly and you cannot tell where I had blended the two sections. Overall highly recommend and their customer service is above and beyond!

Nice low odor epoxy, easy to mix, squeegee in kit is useless. Don’t underestimate the amount of floor prep required. I would rent a grinder instead of acid etch if I was doing again. Get the floor clean clean clean before applying. This kits is barely enough to do a small two car garage. Another gallon would make it easy to get a good thick even coating… also needs more traction material. The small bag that comes in kit is not enough to get a decent traction surface.

Put on shop floor. 36' by 12' had to get 3 buckets to get result I wanted. May have been the type of wood flooring I used it on that required three buckets.

I got the kit and we had to remove a coating before we could put down the Epoxy, so we mixed the acid that was provided in the ratio recommended, but that didnt even make a dent in the cement. So bought 2 gallons of acid from Home Depot, and mixed it 24 ounces to a gallon - see this worked - you could litterally hear and see the reaction when poored onto the concrete. We had to leave the garage due to the fumes.Washed out the garage 3 times and had 3 fans going for 2 days to dry out the garage.Applied the Epoxy on a friday after noon at 3 pm with temps in the 80s - next morning the majority was solid but found spots not cured at all...But even the parts that seems to be cured are easy to kind of peel of with a single finger nail....I have had heating fans in the garage for 2 days to see if we can get the soft spots to cure, and its mot working - stay away from this product !!!!Wasted some $600 on this product and that seems a complete loss, have to go back and figure out a new plan !!!