XPLORE OFFROAD - American Flag Window Decal for Pickup Trucks, SUVs, Cars Universal Vinyl Graphic (Black Die Cut)

Love the looks. Get lots of compliments. I did take one look at the decal and decided immediately that it needed to be professionally installed. Couple tint guys wanted to charge over 200 because it wasn't "3m" and they didn't want to deal with having to pop every air bubbly. But the guy i choose to go with only charged me 80 and showed me how to pop the bubbles. Whatever, it looks great and I'll keep it on until some Antifa fool breaks it.

Decal would definitely be easiest with two people however I was able to accomplish alone. I thoroughly cleaned the rear window with Windex and then kept it sprayed down and wet afterwards. I slowly pulled the backing off exposing the adhesive side of the decal. Be careful during this part and go slow as to not disrupt any edges especially around the stars. I would use Windex and spray down the adhesive side of the decal and kept it pretty wet during this process. I sprayed the back window again and lifted the decal into place by myself. The Windex allows significant time to move around and position the decal. After this, I used the supplied squeegee to get the air and Windex out. NOTE: When you are using the squeegee go from left to right!!! If your window is really wet and you start to squeegee up and down, you can throw your stripes out of level!!! On trucks with the inset sliding back glass be sure to squeegee from the edge of the sliding glass outward and DO NOT cut out the center section for the sliding window until you've squeegeed the main window portion. This will help the decal set up and make for an easier cut with the razor blade. I also let the decal sit for a while to really dry out any remaining Windex before trimming the edges of the entire decal. This will prevent the decal from rolling/bunching up and leaving a nasty looking cut. It also makes the backing easier to peel off after the decal has set up for a while. Take your time and go slow during this process. This is key as to not disturb any of the straight lines and star edges. I love the look and how it turned out! Take your time, this is a high quality decal and will turn out great with patience!!!

Great decal, not too difficult to install. The rear window made it a little challenging but overall I'm pleased. I made tape handles and used them to hold while cutting. Helped a lot!

Love the matte black look! Definitely use the soapy water method to install as this thing is way too big not to! I can see this being doable for one person but I had my wife help me with this one. I tried another flag a few days prior that I ruined trying to peel the backing off once I got it on the window. Also, with this one we got a small tear on the corner of one of the stars while peeling the backing off so be super careful during that process. My wife came up with the idea of spraying the soapy water solution onto the decal and backing as I was peeling it off and that helped tremendously!

Love the product! Looks good on my 2019 Toyota Tacoma. The back window moves side to side perfectly without messing up the decal. Thanks!Now can you make me some Oregon Duck wings that fit the side fenders with the same material haha