Features: 100% brand new Voltage: 12V Output power: 3W Color:white Material: ABS+Aluminum alloy Quantity: 2 pieces Package size: 9.5 * 3.8 * 9.5 (cm) NOTE: The item only fit a part of Cadillac models. Please read the Compatibility List carefully before place an order.If you have any question about the installation or quality ， if you are not sure about the car model,please kindly contact us before you place the orderwe will do our best to serve you. According to the buyer experience, the door light would not fit for the following car models: 2005 CTS,2008 CTS,2010 CTS, 2011 CTS, 2012 CTS, 2012 CTS Coupe ,2013 CTS,2014 CTS ,2014 CTS AWD PERFORMANCE 3.6, 2014 Cadillac CTS Sedan,2007 Escalade, 2008 Escalade, 2010 Escalade, 2014 Cadillac Escalade,2014 Cadillac Escalade platinum, 2016 Escalade, 2013 Cadillac XTS, 2013 ATS, 2007 SRX, 2008 SRX,2012 SRX ,2004 Cadillac Deville DTS,2009 DTS, 2002 Cadillac Deville,2011 Cadillac ESV. Compatibility: Cadillac SRX 2011-2017 Cadillac XTS 2009-2016（2013Except） Cadillac ATS 2014-2017 Package Include: 2 pieces welcome light You need to order 2 sets If you would like to install the lights for your 4 car doors. Installation Instructions: 1. Use A Flathead Screwdriver Or Installation Tool In The Package To Remove And Disconnect Original Door Step Lights; 2. Plug In new Door Lights With Correspondent Connector; 3. Put new Door Lights To The Spot Where Your Original Step Lights Were. 4. Done! Logo Should Be Projecting On To The Ground.
M**E
2013 srx
So far, so good...just installed today. I can say I had to take a screwdriver and straighten out the prongs inside the light as all 4 lights were a bit crooked and wouldnt quite fit easily into the light plug on my caddie but after that, they went right in. Very bright, looks so sleek when I open the door at night!! Really hope these hold up and stay this bright and continue to work.....wanna impress all of my passengers;-) I like they are LED versus the factory bulb my srx came with so that should be a good sign! Also each had a left or right sticker so u don't end up putting them on the wrong side. LoVE!!!
L**S
Do NOT fit Cadillacs
Had to give 1 star in order to leave a review. If you own a Cadillac DO NOT BUY THIS PRODUCT!!! This product does NOT fit in a real Cadillac vehicle. I bought two sets to light all 4 doors of my CTS, & I wasted my money. If the seller wants to sell to Cadillac owners, with the Cadillac copywrited image, the least they should do is ensure it will fit a Cadillac vehicle. (I drive a Cadillac CTS, these will not work).
M**A
2004 CTS Works! But SUPER difficult
Your browser does not support HTML5 video. TL;DR yes, it’ll work for a 2004 CTS, but it’ll take you a LONG time. Newer models are fine, but think about getting an attachable courtesy light projector for older models.This will work for a 2004 Cadillac CTS, but it’s not as easy as the YouTube video tutorials make it seem. Unlike the newer models, the door lights in the 2004 CTS are installed in a white plastic cradle that holds the bulb, & is covered by a plastic frame. In order to install these lights, you have to:-remove the entire courtesy light unit-remove the bulb from the white plastic cradle-gut the cradle by removing all plastic pieces with pliers that used to hold the bulb in place-punch a new hole for the wiring to go through-plug the light in using new opening-drill a hole through the plastic outer frame (you won’t see the projection without this step)-slide light into white cradle-cover new lighting unit with plastic outer frameThen after all this, you have to try to put the entire unit back into your door while keeping the light in place. If it doesn’t line up with the drilled hole precisely, the image will not show.I highly suggest doing this at night so that you can actually see the image on the ground to ensure you’re not covering it with anything.If you have a newer model, this should be a piece of cake. If not, it might take you a few hours!!
S**.
... first saw these lights on my friends mercedes and loved them. She paid 250
I first saw these lights on my friends mercedes and loved them. She paid 250.00 at the dealership. I found them on amazon...read the reviews and thought it was worth a try. Received them today and my husband had them installed in 5 minutes. It's as simple as popping out the cover and unplugging the factory bulb and plugging in this one. The result is amazing. Easy upgrade to your vehicle! Yes buy them. They are awesome. If you have a Cadillac the light reflects the Cadillac emblem colors!
W**M
Hella PIMP!
these do not fit my 2010 DTS, so had to do some fabrication...after it's all said and done...I highly recommend these. Very bright and colorful Caddy logo on the ground...VERY BRIGHT AND VERY CLEAR...hella pimp.
A**R
JUNK!!!
Couldn't leave no stars!If I could I would!Package Doesn't explain you will need another part or anywhere online does it say you will need an adapter or whatever!! This crap is junk!! Don't waste your money!!!!!!
F**Y
With a little fixing they appear as shown
Looks great. My mechanic installed mine after removing the original ones leaving an open gap. Used double side tape with the grips to stay in place were used. Now thy don't fall out. There smaller than the cut out. I purchased two sets could only use in the front
H**R
Fits the 2017 CT6
It fits my 2017 Cadillac CT6. You would think they would include directions but they don't. I like them they look nice but not as bright as in the pics, I would recommend them. Kind of a novel add on. FYI on my CT6 you have to pop out the whole housing not just the light fixture itself. I tried to find the install instructions on youtube but only found other makes. They showed removal of the fixture only which I tried buy didn't have enough leeway to disconnect the electrical fitting until I took out the whole housing.
Trustpilot
5 days ago
3 weeks ago