Clothes Drying Rack,Laundry Drying Rack Wall Mount, Space Saver Clothes Rack,Retractable,Collapsible(Tri-Fold), for Balcony,Laundry,Bathroom, Dark Grey Color,3z-g02

This is great for my small laundry room. It is very sturdy, holds so many hanging clothes, and folds away nicely when not being used.

Practical, strong, functional and well designed.

This rack is great and folds out of the way very well. Mounting is easy, if you have the right mounting hardware for your situation.But don't count on using the mounting materials included in the package, unless you are installing into brick, concrete or cinder block. The rack arrived with two sets of 4 masonry anchors (only 1 is necessary), and an Allen wrench in each packet to tighten the arms. It also includes an adhesive and a wall plate for use on a flat surface wall, without having to drill holes. It is hard to believe this adhesive will carry the stress and torque of a 54 inch arm with hanging clothes. And the included instructions are only for these two forms of installation.If you are installing on a more typical house wall, you'll need to determine the appropriate manner of installation and determine if your location will support the torqueing stress. Then you will need to purchase (if you don't already have) the materials that you need. If you can go into solid wood, that will be best. But the mounting holes on the rack are wider apart than the width of a wall stud. Check the reviews and Customer Q & A section of this listing for more feedback and ideas.I used 4 - 12 X 1 1/2 inch flathead machine screws into window trim and window 2by framing studs. Pre-drilled the holes. These screws filled the holes in the mounting plate well and the head was large enough to make a good seal. This looks pretty sturdy. 2 inch screws may be even better.That all said, once you have figured out your situation it is an easy and quick install. Just don't count on the manufacturer to provide what you need.

Moved into a smaller condo and needed a minimalist solution for drying hanging items. Initially bought something smaller and cheaper - wish I’d just gotten this from the get go. It’s very sturdy and holds so much. Love that it folds down. So easy to use and looks really slick.

I wrote the review below. I just found out the some of the hardware is different to some. I see now that some where given the WRONG HARDWARE. Sad and horrible mistake. I did get the right hardware and mine is solid in my wall. If I was give the wrong hard ware I would have gotten the right hardware. Not everyone knows what will work. I did not get any directions with mine.I am happy with what I got. It is well made. I got lucky.Based on tbe negative comments is what I think might have gone wrong for you.1. Don't use glue to hang this on the wall, no way that would hold with a srew.2. If you can screw into a stud. Studs with 2x4 are 16 inches apart. If your home has drywall, you can try knocking on the wall to find studs. Stretch a tape measure or yardstick along the wall horizontally to track the path of your knocks. Moving your hand an inch each time, knock along the wall. Listen to each one. It will have hollow sound, but when you hit a stud it will sound Solid.You can take a small nail and hammer through the sheet rock and feel the stud. You can mark when you hit the stud. Put you rack over that spot lining up the bottom. Then mark the other 3 spots level. Now on the opposite side of the 1st hole. Do the same hammer and nail to see if you hit the stud. If you don’t, no problem. Those white plastic insets, make the hole a little bigger but a tad smaller. Then take your hammer and gently tap it. Do the same for the bottom. Then attach hanger srew in Sud first the screw into plastic hanger holes. If where you want this to go does not have a stud simple do a pilot how for the white plastic hole hanger. Mark your hole with a pen. Then us a small screw driver or a large nail and hammer to make holes. MAKE SURE THE HOLE IS SLIGHTLY SMALLER THAN THE WHITE PLASTIC!!! You can always increase hole but not make the smaller. Go to youtube and learn how to do things.I have hung things over the years that weight 60 pounds more or Less in just sheet rock and never had one pull out. There are other ways too but what I explained will work. My is up fine and strong.Note: My came with no instructions except to glue hangers in place Stupid I leave them free. I have no ideal what that plate is for. It seems to me the holes should be in the plate to mount on the wall and you slide the hanger in. I have had other things work that way. I see no use for it here. Hope this helps.

Good quality, heavy too, get the one with closed loops instead of hooks so the wind won't blow your hangers off.

I like the idea of this hanger. It definitely helps save on space, however, if you are hanging clothes on towards the front, it starts to droop down. I tried readjusting it, and it works temporarily, but eventually the droop comes back. If you buy this, put it up high enough so when it does droop down, your clothes don't hit the floor.

I put this at porch. More room and space

Love the way it folds up when not in use, I have it in my laundry room to hang heavy wet items to dry instead of spending hydro $$. Love it so much I may purchasse another one for outside.

Es de buen material. Se instala fácilmente. Ideal si no quieres los clásicos lazos o mecates. Se puede plegar y girar. Esos es muy práctico. Recomendable!!

Me gustó que es muy fácil de poner, práctico para colgar la ropa y no ocupa gran espacio, me gustó

Did not come with the extension and no option to let you know it was an option looked like part of it from the advertisement

Los espacios pequeños no tienen porque estar desordenados, con este artículo todo siempre en su lugar