Glowteck 9005/HB3 LED Headlight Bulbs Conversion Kit - CREE XHP50 Chip 12000 Lumen/Pair 6K Extremely Bright 68w Cool White 6500K for Bright & Greater Visibility

Installed these on a 2011-16 F250.These are Awesome! They could easily save you from an accident! Buy Them! I wasted $70-90 on high-end “xenon” halogens which pale in comparison.I was worried about the beam pattern and waiting to see a bunch of scatter and have to try to turn/adjust etc to get something halfway decent. To my surprise these put out a super bright clear white even and wide beam with a very crisp cut off line right where it should be (below the heads of oncoming drivers).Bright white, even light everywhere on the road and side where it’s needed! I’m now getting a headlight pattern and brightness on an F250 with stock reflector headlights that’s almost indistinguishable than the pattern brightness from my Lexus with projector headlights HID bulbs.They install is PLUG & PLAY on F250It’s almost as easily as the stock halogens.Keep in mind that the one and only time I asked a dealership to install halogen bulbs I bought, they charged me over $100. It’s not a reach in, twist, pull, push twist done install on my F250 regardless of the bulb.The stock halogen install (NOT these) involves removing the grill cover and head lights, detaching the wiring clips, and unscrewing the bulb then repeating in reverse.However, I usually have a Westin HDX grill guard on the front of my truck so I take a different route.I finagle halogens into place by going from under and behind through my wheel wells after partially removing the shrouds/covers. I would probably be able to get these in (I might have to completely remove the wheel well covers) but it would be slightly more difficult and annoying, due to the addition of the (led driver) rectangular box.Fortunately, I timed this to coincide with another modification which required removal of the grill and grill guard anyway. So in this case, instead of being slightly harder...The Install Was SUPER EASY!I just installed these so I can’t review longevity. If these were to only last a year I would still buy them before halogens. I will update if I have any issues.The connections are also all sealed and waterproofIf I stand next to the hood/headlights I can hear the fans when they’re on if there’s no/low ambient background noise.Packaged very wellThese came with everything I needed for UNDER $100.00!!! They also came with two additional bulbs (directional/ambers??) didn’t realize until after putting everything back together :/Cons:Made in ChinaHigh Beams feel like they should be brighter, but it may just be because the low beams are so bright.

Works at expected

I purchased these 3 days ago for my 2006 Dodge Ram 3500 dually, and they arrived today! A great first impression! The factory halogens were bright, but didn't cast the light as far as I would have liked. So, it was time for an upgrade and boy am I ever impressed!?! Straight out of the very well put together box, you have both two LED H13 bulbs (for this particularapplication), the two seperate driver modules, double sided foam tape to mount the modules, two zip ties to secure the wiring from flopping around, and two peanut LED bulbs as a bonus to an already spectacular kit.Installation was straight forward and the detailed instructions would prove helpful for someone unfamiliar with this process. Basically, remove your stock halogen bulbs, plug in the LED H13 bulb with already attached and aligned base, plug up the keyed driver connector, connect the factory pigtail to the other connection on the driver module, test (wearing dark sunglasses), and secure wiring as needed. Took about 10 minutes on my truck due to removing the airbox for access on the passenger side. Additionally, the two extra bulbs fit perfectly for my license plate lamps.The light ouput is easily double that of the stock bulbs and the prealigned bulb bases were already perfectly setup right out of the box. I seriously suggest dark sunglasses or a welders lens if you have to look at the bulb to adjust the direction of the bulb to project correctly. I can't speak on the longevity of these bulbs, but the 2-year warranty is a good indicator so long as it's honored if needed. I will surely update if anything goes wrong. Though the integrated cooling fans provide what seems to be ample airflow out of the bulb's base. All good signs.Overall the kit was shipped quickly, quality packaging (similar to what you might have received your last smartphone in), well made components and product finish, and easy installation. A similar setup from a local shop would have easily ran me $400 installed. This was a no brainer at less than $90. My wife has requested that I install these in her SRT8 Charger as well. Will order them soon. Thanks for a quality product that stands out above all the other half witted competitors I have tried in the past.

Best quality in the markets