KOLAKO Bendable Ceiling Curtain Track Flexible Curved Curtain Tracks Wall Mount Room Divider RV Curtain Track Heavy Duty Curtain Rail System 14Ft Ceiling Track for Curtains Bay Window

Description

KOLAKO Ceiling Curtain Track, 14FT Flexible Bendable Curved Curtain Track Ceiling Mount Slide Rail Accessories Bunk Bed Curtains RV Curtain Track, Room Divider Ceiling Track for Curtains You’ll Get for Drop Ceiling Curtain Track 1 x Flexible Curtain Track 14Ft 36 x Curtain Track Gliders 36 x Curtain Track Hooks 14 x Snap-on Ceiling Brackets 14 x Snap-on Side Brackets 4 x Curtain Track End Caps 28 x Anchors And Metal Screws Installation Suggestion: 1.Make the sliding curtain track straight first. You can wind the track up and tie it in reverse. 2.Determine the point to be drilled in the wall, and drill with no.6 drill. The spacing is between 40cm and must be in the same straight line. 3.If ceiling curtain track heavy duty is installed on wood, then no need to drill holes, and the support can be fixed directly with screws. 4.The bendable curtain track wall mount is I-shaped with the narrow side up and wide side down. Slightly curved on the wide side, used for hanging pulleys. 5.Installation sequence: the wall code is fixed with screws first, and the track is covered with pulley and sealing before the track is stuck into the wall code. You can use a word screwdriver to make it easier to push the sliding block. The top code is to hook the top code on the track first, and then fix the top code with screws and put the seal and pulley on before fixing the top two on the far side. Friendly Service If you are able to butt up the rail track ends as close as you can, then you should be able to extend it. But again, as close as you can with the rails ends. That includes securing the clips you have to screw into wall, ceiling, window frame, etc. That attached to the track.