6 pcs LED Backlight Strips Replacement Set for TCL TV 65HR330M08A1 65S421 65S425 65S423 JLD65081330-365AS-M_V03

Worked great! Fixed my TCL 65”. As listed, there is no double sided tape on the back of these. I used double sided Scotch tape and stuck it on the TV where the LED strips go, then put on the lights on and pressed them down. We shall see how long they last, so far so good.Tip-there are little “nubs” that stick up and you line those up in the holes on these light strips. Make sure that you line up the screw holes in the middle of the half circles so that you can get the screen stand offs back on. This will make sense when you get inside the TV.

These we're a direct replacement for the LED strip in my TV, TCL 65S4. They did not have adhesive on the back, but the TV has screws in a couple of places holding them in place.I just watched a YouTube video and was able to replace the LEDs and the TV works great. I did have suction cups for the screen glass. It would be difficult to keep the glass from breaking without suction cups.To determine if the LED strips were bad I just checked the voltage coming out of the power board to the LED strips. I had 86 volts on each of the two connections going to the LEDs. Since it had power and the LEDs did not light up it meant that one of them was bad. This TV uses six strips each with eight LEDs. The 86 volts powers 24 leds which means that each LED uses about 3.58 volts.It took me about 3 hours as I worked slowly since this is the first time I've ever fixed LED strips.I would recommend having a Phillips #1 & #2 screwdrivers with magnetic tips as there are a lot of screws.

Received a free tv bought these to see if that was the issue and 30 dollars later I got me a 65 in smart tv working again

Thanks

Fit as described. Search on youtube on how to take apart and replace LEDs. Should take about 2-3hrs to do. Take your time, don’t rush, you can actually break stuff if you aren’t careful. I suggest having a 2nd person assist you. Tv was given w dead LEDsNow it works as brand new. This is a cheap fix if Actual screen isn’t broken or damaged. Try to place LEDs as to be able to screw the little covers back on if you don’t it’ll stick out too much and might be an issue when put in it back together. 100% recommend if using for models described. Mine was the TCl 65S4 65” Roku tv 4k

Repairing a 65" TCL TV with bad back light. Opened the TV first to read the numbers off the existing LED strips. Those numbers were listed as compatible in this item's description and the photos were a good match, so I ordered. Once they arrived, they were in fact a very close match (dimensions, wire connectors, LEDs, mounting holes, etc.) and I installed no problem with some double-sided tape (not included). I was very pleased as this fixed the backlight problem. Unfortunately, I must have cracked the display somewhere in the process. Heartbreak! Double heartbreak!! I still recommend repairing your backlight problem TVs but be very careful in the planning and execution of your process. Set up a large, clean, out of the way working space, and have extra hands available. These were my mistakes, but I still think it was worth the gamble. Good luck to you!

These LEDs work as described but they do not have any way to stick them onto the TV shell. Provide your own adhesive.

This is what I needed to repair my 65" flat screen tv backlight strips I found 2 bad ones, But I will replace all 6 backlight strips