BonesWheels Hard Bushings (2 Set)

These hard Bones bushings are my favorite! I'm 200 lbs so most bushings result in wheel bite. Bones bushings allow me to carve hard in bowls and prevent my wheels from contacting my board.

Having not skated in at least a decade and being middleschool aged the last time I was, I hadn't thought about the fact that getting back into it being 6'2" and almost 200lbs even trucks with brand new bushings fully cranked down could still be gummy (brand new stage 11 hollow indy's). However swapping the stock bushings with these bones hardcore bushings is a life changer. Only a few 1/4 turns of the king pin and you'll achieve the same stiffness as the stock ones being fully cranked down. I actually left them a little looser than I normally would cause they seem to even improve the boards stability. I put these in new trucks cause I went with a wider setup, but had I used my old trucks I'd still swap these in

I have had numerous trucks and many different bushings and hardnesses over the years, and they have all been fairly comparable to each other. These bushings were the first ones that I really felt were different. Their design is more conical than other bushings which I believe leads to their nice progressive feel. You can easily make slight corrections but then the resistance increases very progressively to prevent wheel bite as you lean more and more off center. I am very satisfied with these. In the future, I will probably put these into new trucks as soon as I get them instead of waiting for the stock ones to wear out.

I needed harder bushings for my Independent trucks, but these just weren't the deal. They creak and didn't feel great. I went with the hard Indy bushings (black) and they're perfect.EDIT: Okay I take back what I said. The Indy hard bushings were good at first but they got cut/mangled after two weeks and the trucks would get stuck crooked. The Bones still creak a little but they don't get stuck. Very stable.

I threw these on my custom eskate that has double kingpin trucks. I mixed medium and hard bones bushings to get the feel I wanted. They make the board feel like it had a huge upgrade! Even at 50km and hour hitting an occasional small rock in the road the board doesn’t dance around anymore. I can shift my feet around at high speeds without getting speed wobbles and I still have a great turning radius able to do u turns in a small two lane road. You can really feel the difference with these! I will never buy a different bushing ever again! These guys nailed it! Try them!

I bought these to better a set of inexpensive Tensor alloy trucks and the bushings made all the difference. I weigh 180 and like to skate sort of tight and stock bushings on even good trucks usually fail to push back to uncompressed position when tightened. These allow good turning while remain tight and return to a standard position instantly.

I push mongo. With conventional truck bushings, your board tends to drift left or right when you push mongo depending on which way you were leaning when you take your front foot off to push. These bushings are the only ones I've ever found that return to center so when you push, your board goes straight. I also like to ride my trucks really tight. The plastic inserts seem to protect the urethane from mushrooming out when you run your trucks tight. So I highly recommend these, especially to skaters who skate mongo or ride their trucks tight. I'm sure they last longer for anyone else also.

Bones Wheels Hard Bushings (2 Set) are great. They provide good support and are easy to install. I would definitely recommend them to anyone looking for a good set of bushings.