Micnaron Luggage Case Wheels with ABEC 608zz Bearings, Inline Outdoor Skate Replacement Wheels with Multiple Sizes, One Set of (2) Wheels

These wheels worked great. My suit case never rolled better. It is for my Victoronix carry on bag. I used it just recently on a long trip with several stops and a short trip. The wheels rolled smoothly.My case had a different mount than they were intended. With a minor amount of enginuinity and left over parts from my tool box I had them fitting and rolling properly.

I used the 80mm version to repair four of our Victorinox suitcases. The shaft of the original wheels is longer on the inner side than these wheels. I had to use several washers on the inner side to make up the difference. This way I can tighten the bolt all the way without binding up the wheel. I also used blue Loctite to keep the bolt in place.The bad news is that they only include 4 washers in the package, which isn’t enough for both wheels. I had to buy some extras to make this work.Also, with my last order one wheel is off balance and wobbles as it turns. I’ll report this to the seller and see if they’ll provide a replacement.I knocked a star off my rating for the lack of enough washers and insufficient quality control.

worked fine with my older TravelPro rollaboard. probably should have gotten next size down from largest. Had to change out bearings from the old wheels as the bearings that came with it had a smaller diameter of the inner sleeve than the original did. Roll very smooth, but if experience is any guide they may not last as long as the originals due to design differences....flat wheels I think wear longer than ones that are really rounded on the part that hits the ground...they distribute wear over a larger area......round wheels in my experience eventually split and come apart..but they roll incredibly well ....should last long enough...or I will just buy new wheels again.

These wheels didn’t fit well, and got worse over time. Part of the problem is that they were a different style than what came with the suitcase, but they were a disaster!

(Measure the wheels on your luggage first to ensure you buy the right size)This 80mm wheel works perfect for my Victorinox carryon luggage. 1. Take off the stock wheels with an Allen wrench. 2. Pop out the bearings from stock wheels. 3. Pop out bearings from new wheels and insert set of bearings previously removed from stock wheels. 4. Attach new wheels to luggage using original bolts. Apply blue loctite to threads and tighten lightly. (If you tighten too much the wheels don’t spin freely).I couldn’t be happier.

Bought these to replace the original wheels on my victorinox carry on. Love the bag, but the rubber on the original wheels literally wore out. The 80x24 replacements were perfect. I did swap the original bearings over to the new wheels as the spacing seemed better. Reused the original bolts and added a drop of Loc-tite for good measure. A perfect solution, much cheaper than buying a new bag.

Worked but not as smooth as the original wheels.

Fit my 20 year old Timberline roller bag perfectly. Rolls smooth and quiet. Happy with this product