4x6 FT Greenhouse for Outdoors, Polycarbonate Greenhouse with Quick Setup Structure and Roof Vent, Aluminum Large Walk-in Green House for Outside Garden Backyard, BlackRecycled Claim Standard 100

I am a professional grower, and this was perfect for my zone 9a home garden.Sturdy but lightweight. Attractive but affordable.MUSTS: truly level building surface, #10 socket wrench, lay out all parts in advanceI was concerned about the build/time after reading other reviews. I did this alone in an afternoon. Most of my challenge came from a design change I made (I moved the roof vent from front left to rear right, and I didn't pre-plan for a few minor details that took 15 minutes to fix), and due to the delicate alignment in the roof that would just be easier with an extra set of hands on the outside. The plans weren't 100%, but I had absolutely no issue with them. A caveat is that they are in "pictograph" form, and if you aren't fluent in that type of instruction manual, there will be a learning curve. There are some moments (Ie. all the door corners look identical) that you need to use a wee bit of common sense (if the holes don't line up, then adjust them around until the holes are lined up), but each of those moments are contained within the individual pictograph. If you don't have it right, you can't move on, so no worries about it surprising you down the road.I strongly advise you work on a leveled level surface. Dips in the concrete will throw the alignment off and make the multiple insertion point moments more challenging. (Ie front to back joining, and roof assembly). Line up all your parts in numerical order. Some parts are saran-wrapped together for a reason, but some are just for packing efficiency. Take it all apart and organize it. A spacious work space really helps. Your own tools will make this go WAY faster, but tools are supplied. There are extra nuts/bolts/screws so don't panic. A second set of hands would make the roof assembly easier, as lining up multiple sliding points is not the easiest thing. But it is the hardest, so this is very do-able! And give yourself time. Frustration on the tight fit of the parts will likely try most peoples patience. But the tight fit makes for a good end result. This is good enough to mouse-proof.NOTE: the clear panels are professional type, and is the same grade we use in low-budget structures. I know they are not what everyone expected. Traditional plexi doesn't refract the light, and true glass is expensive and requires "treatments". But this will hold up through at least a few seasons, and once you start to see yellowing (beginning of UV caused brittling), you can order replacement "glass" and cut to size. It is actually more expensive than this entire kit was, and the reason I went this direction.

DO NOT PURCHASE! I would give this dang thing a negative 5 if it was possible. The directions should not even be in the category of directions. Silly pictures with no wording that make absolutely no sense. I dropped one of the metal bars while putting it together and I had to bend it back into place….with my fingers. That’s how flimsy this is. Parts don’t fit properly. Also, TERRIBLE customer service. I have been asking for a replacement part for a week. Sent pictures, exact description and part number. Still going back and forth. I guess I’ll rig it myself…kind of like I had to this with the rest of the thing.

Nice green house. Took 6 hours s to put it up. Directions are not the greatest. Be forewarned. Some panels do Not go in the same. The first ones fit nicely in the Track all the way around. The other sit in the track but the tops of the panels don’t. Wish it had spots to way it down.

This green house is prefect for a small backyard or for starting seeds !! The customer support is also super great and helpful ! One of our parts was wrong and they sent out the correct part right away !

Been using for almost 2 years now I’m 5,11 and can stand in it just have to bend down a little for the door instructions where meh but nothing broke keeps humidity in and stays warm

If you have strong winds, this will fly away. Not wind resistant if you have monsoons. It’s less than 50 pounds and the panels are like a plastic straw material. This does look nice inside. It is very dry and my house plants need humidity.This is just short of 4x6 as well.Putting it together is not hard but it’s frustrating because the instructions are not the clearest but you figure out where your mistake is quickly.Kind of disappointed with this but it will work for what I need it for.

True size.Outside dimensions44.5”D X 66.5”W X 76.5”H (46"H base to slope roof)Door 20.5”W X 60.75”Hinside42.5D”X 64.5”W X 75.5”H (46.5”h base - to slope roof)As you will see from everyone’s reviews the instructions are a challenge. I uploaded some notes on nine of the pages of instructions to help future purchasers out. I did not upload every page of the instructions. It took me about 10hours by myself over two days to constructs. If I had to do it over, it would probably only take me 3-5hrs.The key is to follow the numbers and look closely at the detail diagrams to see the part orientation. I’m an ADHD dyslexic, so not the easiest thing to do.The painted aluminum will scratch and bend quite easily, so take care when assembling.Once built the greenhouse is lightweight and sturdy. I recommend two people to move it. There are no anchor points, so you will need to figure that out on your own.The kit came with everything you need to assemble with a handful of extra screws and bolts.I recommend using a #10 socket and/or wrench. I also don’t recommend over tightening parts. Especially screws which go into plastic fittings.I was disappointed that the package didn’t fall under prime, but for $42 (I think) the product was fedex’d to my house in Louisiana within two days.Once built, I feel the product has good quality and is worth the ~$200 that I spent on it and shipping.I’ve already recommended to several friends with the note about the installation. Hopefully my notes will help others in the future.