Anker USB C Hub, 4 USB 3.0 Ports, Aluminum USB-C to USB Adapter, Compatible with MacBook Pro 2018/2017, ChromeBook, XPS, Galaxy S9/S8, and More Devices

The media could not be loaded. THIS IS AN EDITED REVIEW: The original item I received appeared to be defective and Anker asked to send me a new one, which I accepted hesitently and it worked as expected. Well done Anker, few companies today would make sure that the customer is satisfied like you did.I like a clean desk and clean lines, I also bought myself a new Apple MacBook Air and the lack of ports sent me looking for a hub for all the items I looked to plug in.Looking for in purchase:-Sturdy-Value-USB 3.0 (at a minimum)-Long CordDesign: The Anker USB C Hub to 4 USB 3.0 has a sleek and clean look. The metallic grey works great with the MacBooks and the slim design is great for hiding it underneath a desk.Issues: When I checked the transfer speeds of the devices plugged in they were well below the USB 3.0 speeds and the up to 5GB that was advertised with the item. (Anker sent a new one and I believe that it was just a defective unit)Cost: $17.99Positives:++Material++Look++Design++Build Quality++Cost++Transfer speeds (on the second one)Negatives:--Slow transfer speeds (on the first one)Final Thoughts: I did reach out to the company and they offered two solutions. One that I plug the item in faster, which caught me off guard that the speed I physically plug something in could affect the transfer rate. (Yes, I confirmed that they meant to plug the item in faster). The other solution was that they would send me a new item, which I did take them up on and the new item worked with zero issue. It transferred at top speed and worked perfectly with both an SD Card reader and a SSD enclosure (among other things). I will say I wish it had USB-C ports but, they never claimed that it did so no knock for that. I love the cord length and all and all works great.Would I recommend: Absolutely I would. This is a great product and the company stands behind the item, that is rare in today’s world.

I needed more ports to connect a couple of external drives that I was connecting into a RAID-1 array. The drives were both USB 3.0 and quite inexpensive for their 4TB size. Combining the two was considerably less expensive than buying a dual enclosure RAID drive, so I decided to try this route. The only problem was that I was running out of hub space and on-computer ports.I saw this USB-C to USB-A adapter and realized that I could not only get more ports, I could also get more speed by running through USB-C and avoid a speed bottleneck. I've always been happy with Anker products, so I put in my order, received the adapter, plugged in the drives, formatted them, set up the RAID through the computer, and everything worked like a charm.If a drive fails in this unit, all I have to do is plug in another drive of the same size and tell the computer to rebuild. I've had three RAID failures in dual drives over the years, and in every case, the failure has been in the controller board, not the drives, which rendered the unit useless until I bought another dual unit enclosure or simply replaced it and reused the drives elsewhere. This Anker adapter allowed me to set up a cheaper and more flexible drive setup for less money with still good throughput.The unit itself is constructed solidly. The cord is long enough for convenient positioning, unlike a lot of this type adapter. It's solid, built on focus to its purpose, and it works flawlessly. And the price is quite reasonable.

I still have some well-working USB-3 devices that I have to connect to my MAC Mini using USB-C ports. I had been consuming 2 USB-C Ports for 2 external DVD Drives and needed to add a new USB-C peripheral, so this cable let me connect the 2 drives to one USB-C port. In the past I have seen performance issues when doing that but this hub seems to run at least as fast as my devices, so there is no performance loss and I freed up a valuable USB-C port for a new external device. I saw a comment from someone about the cord length. In my case I would have liked to have the cord shorter, but I am OK with the length which seems to be 18-24 inches.

Okay, so I bought this to use with my MacBook Pro. I HATE the laptop keyboard, and I have NEVER liked using TrackPads, so I always carry a Logitech K400r keyboard & a wireless Logitech Marble. Both have wireless dongles & both are straight USB. Which is an issue since the MacBook is ONLY USB-C. I do have the standard Apple Dongle, but that had only 1 USB port. I was plugging an old USB hub into that, but it was bulky, slow, & had a separate power source. Which made for a lot of clutter on my desk. So I figured I would use this, it would eliminate the need for the Apple Dongle, and the power cable, along with being MUCH smaller, and the color matches my Mac. All good so far. Add to that, it feels solid. I THINK its got an Aluminum case, but even if it isn't it SOUNDS like Metal. So That's another plus. The MAIN issue I have with it is the cord. Its much shorter than my last hub, but its still TOO long. It only needs to plug into my laptop, not be out of sight somewhere. 2 inches would be plenty, but this is just 3x too long. I tried coiling up the excess, but it created interference with the WiFi dongles. So now I just have it loose. Everything works fine, it just bugs me. Other than that, its a perfectly fine product. If it had the shorter cord, I would have given it 5*'s

I need this for my new laptop to connect to USB Hub and it works flawlessly wit no issues or speed slowdown. Portable &right size too.