Black & Clear Tall Fairing Windshield Club Style Kit Compatible with Harley-Davidson Dyna, Super Glide T-Sport FXDXT, FXR

This is installed on a 2019 Harley Davidson Fat-boy slim. The biggest issue I had was headlight fit. The items that people ordered with the shield like headlight extension, which you will need doesn't work on newer bikes and is not returnable. I'm semi sure it would work on older bikes. I ended up just fabricating one or two because the first one I made broke in half, while on a ride. Use at least 1/4 inch plate steel. Visibility is a concern also because glass has a flip in the top couple inches things are distorted I think I will order a slightly lower shield so I can see what's on the road directly in front of me.Warning there are no instructions so you have to figure out what your going to use on which bracket, they do give you enough hardware but it is up to you to figure it out which just makes the install a little longer, tighten all loosely so you can wiggle around and center everything and don't forget to tighten before you test drive as you will quickly figure out what you missed on the final tightening. I forgot two and had to find replacements

Let me start by if you are looking for a good looking fairing but dont want to spend money or dont have the funds to spend on an expensive one this is the way to go. I tried getting my mechanic to install since no directions we're provided with this product. However there is good videos on youtube that show you how to install. I did mine and it was fairly easy. I own a 2013 street bob and unfortunately the other product amazon recommended to buy with the fairing did not work for my bike which was the Memphis shades hd block. What I did use was the moon's mc headlight block. After buying this I found out there are fork clamps that you can buy instead of hooking this up to the triple tree. Might look into this. I ride every weekend and so far after month and a half riding I have had no issues and a lot of people complimenting my bike. Maybe another negative is that the windshield does cause your helmet visor to shake alot because of the air deflection and if I place the fairing higher it might help that issue but the windshield is not really see through so it distorts your vision depends on if your willing to take that risk.

I mounted this on a 2012 Dyna Super Glide Custom. Fairly long winded review coming...I'll talk about installation first. There are no instructions for mounting this, but it's pretty straight forward. There are videos online you can search for that will help if you run into trouble. The main issue is that there is no headlight relocation bracket with this fairing, and neither of the two mentioned in the description worked for me directly. I started with the Memphis Shades one that is the most commonly mentioned, and it puts the headlight too low to properly fit in the fairing. The other is the MOONSMC bracket. It's closer, but I wanted to keep the trim ring I had on my light, and the MOONS bracket set it too far out. I modified the MOONS bracket to work (see photos - sorry, didn't paint before pictures). You need to be careful with the windshield mount, as the windshield feels brittle and the angles on the upper mounts don't quite line up correctly. I had to bend the mount points around a bit (the metal parts) before tightening things up to be sure nothing broke. The hardware is cheap crap... the upper bolts were both 1/2", but the windshield and bottom mount bolts used SAE allen wrenches with metric sized nuts. It worked, but when I take it off for paint (assuming it lasts the summer) I'll replace it with decent stainless hardware.Now to quality... it's difficult to spend too much time picking apart the quality of this thing. For what it cost, I'm willing to overlook a LOT. I will try to be brutally honest here though, so you know what you're getting. The fairing itself feels sturdy and well made. I don't know how well it will hold up long term, but it doesn't flex around or feel like it will break under normal use. I don't know if the outside is paint or just the natural finish of the plastic, but it's very uniform and blemish free. The edges are kind of sharp, like the unfinished part of any molded part, but they don't look bad. The mounting brackets are pretty solid for the weight of the fairing, they stay where you put them and don't flex. They are the standout of this kit. The windshield itself is pretty awful. It looks fine from a distance, but if you look through it at all the image is terribly distorted. There is a spot just to the right of center where a mold "tree" was obviously snapped off and left unfinished. All of it is molded plastic, no fiberglass or acrylic here, which speaks to the price point.In use it's not bad. There is some buffeting, but less than the HD Sport removable windshield this replaces. The buffeting is also down around your stomach rather than at your head, so in that regard this is a pretty big improvement. There is a large area between the fairing and top triple tree (on my bike anyway), and I foresee a bag of some type mounted there. The main fault I see is that this is mounted to a Dyna... which shakes pretty hard just off idle. The fairing shakes with the forks, the windshield shakes a little differently and they rattle together at certain RPMs. I will pick up some foam of some type and mount it between the two to quiet that down. I'm probably taking this bike on a long ride next weekend, so I'll try to remember to update with info from a longer ride when I return.

I seen the product a few times and was skeptical but after looking over the reviews I decided to pull the trigger and I’m very impressed. I got it today and after taking off my headlight brow it took me around an hour to install. I put this on my 2018 lowrider and I’m glad I found this before I bought the 300 dollar Memphis shades one. Only have one picture as it was dark after I put it on. But I took the bike for a spin and it feels much better.A few things to help out..- no instructions but there is 2 YouTube videos that I know of I watched them before install and made it a breeze.-For my case the 2018 lowrider I didn’t need the headlight extension bracket. If I did anything I would probably make a extension piece out of some scrap steel but it doesn’t look bad and doesn’t have a huge gap, actually fits pretty snug just a little back.-It’s not a quick release it mounts to the bottom of your triple tree but I don’t think I’ll ever feel the need to take it off it looks so good.Could you find some things to complain about with this fairing? Maybe. But for the price I think they did an amazing job!

Love the look of it can’t beat it for the price but mounting is very difficult and didn’t come with any instructions and had to make multiple trips to the hardware store to make it work extremely difficult to see though very blurry i have messaged the seller maybe they can send me a different windshield if so would definitely be 5star

It looks pretty cool but the sheild is blurry, contacted the company by email and the only option they suggested was a longer delay for returning it and returning it at my cost , I would gave preferred they send a replacement windsheil

I figured it out and it fits great

UPDATED!!!I added a spacer and a couple more windshield bolt mounts to help with the buffeting and shield.Overall, the quality of this product is good, nice solid plastic fairing, the brackets are easy to work with, with a bit of fabricating itll fit in pretty much anything. Only downfall is the windshield is a bit distorted but doesnt affect the ride as long as its positioned below your eye level,

Conforme

Beau fairing, la couleur noir est presque identique a la couleur vivid black de harley davidson.Installer sur un streetBob 2019 fxbbIl n’a pas de manuel d’instruction mais l’installation ce fait assez facilement. La braquette vien ce fixer sur les bolts du guidon.J’ai du changer 2 bolts dans le kit fournit car elle etaient trop courte… mettez du bleu sur les boltsVous avez besoin d’une braquette pour deplacer la lumiere vers l’avant. Sinon elle sera en arriere du fairing. J’ai pris une plaque d’acier deja powercoat preperser chez rona pour 4$(ceux qu’on utilise pour fixé les 4x4 sur des pergolas). Pas besoin d’en acheter une a 40$ sur fortnine…Au final beau look pour le prix et je n’ai plus de vent sur le chest!!