PPD Printable Vinyl Sticker Paper for Inkjet Printer, Glossy Sticker Paper 8.5 x 11, Self-Adhesive Print Your Own Stickers at Home, Custom Photo, Waterproof & Tear Resistant, Instant Dry (50 Sheets)

I really, really love this matte sticker vinyl! The paper is sturdy and has a nice texture to it, and the colors print super vibrant. I have yet to use any kind of matte anything, vinyl or paper, that prints as vibrant as it does on this material.(A NOTE: For anyone making their own stickers, the vinyl is waterproof, but the INK IS NOT because these are for an inkjet printer, which uses water-based pigments. Please keep in mind that you'll need to use a laminate if you want your stickers to be waterproof!)

I love that the backing of this paper has an almost plasticy coating to it. It makes the stickers feel very high quality and they don't stick too hard to my cutting mat, which makes removing them after cutting a breeze. The cost is a little more than other vinyl sticker paper on Amazon, but the quality is worth the small increase in price. I just wish I could get larger packs!

The media could not be loaded. I started to ordered this paper with Avery Self-Adhesive Laminating Sheets to make them more Water and Weather Resistant instead of purchasing AIVA Paper Group Matte sticker paper, which at one point was costing the same amount to get this Vinyl Matte Sticker Paper and the Avery Laminating sheets.When Printing, I use my Epson Ecotank Photo Et-8550 using the rear feeder rather than putting it in the paper tray below so it wouldn't bend, crumple, skew, or just be ruined. I would HIGHLY RECOMMEND to check if your printer can handle this paper before making the purchase.I use the paper with my Cricut Explore Air 2, and because of the laminating making the paper reflective, the censor can have a bit of trouble picking up the guidelines. I set my printer to high quality and put some Matte tape over the guidelines and to take care of this. Because High Quality uses more ink to make the design look it's best, after printing I let the PPD Sticker paper dry between 5 minutes to even 2 hours before laminating mattering on the design.I will say, when setting it up with your Cricut, this paper can take some messing around with, so be prepared to lose a couple sheets while getting setup for the first time, because this is Laminated Vinyl, I set the pressure to Poster Board + to cut ALL the way through the sheet to get die cut stickers. You may have to do some more testing for yourself if you do not laminate the paper.Overall I am immensely satisfied, My customers have been immensely satisfied, and I will be purchasing more PPD Matte Self-Adhesive Vinyl Sticker Paper in the near future!

I'm printing on an Epson ET-2550, which uses pigment based inks.Let me start by saying I've been testing a lot of papers for a very specific purpose in printing my own trading card game, and for this process, I need an adhesive paper and a paper that can print on both sides. At least one side needs to be a high quality print. I have also been looking for a very specific feature of being able to easily slide cards against each other without having to do anything extra to them to make that happen, but understandably, no paper is ever going to tell me whether it can do that before I try it. I figured I would try this in hopes that with it being vinyl it might be more slippery and slide against other papers better while printing with the high quality for one side that I need.The print quality is good, certainly better than regular paper, but maybe not quite as good as other photo papers. You can see the vinyl sticker on the left compared to PPD's canvas textured photo paper on the right in my attached photo. The colors and black looks slightly faded in the vinyl sticker in comparison. Ignore the weird black lines that appear out of alignment, one of the printer's nozzles was messing up, so that had nothing to do with the paper.I tested the water resistance by getting my finger wet and gently rubbing the corner of the card a few times. You can see the bottom right corner of the vinyl sticker smudged a bit, so it was less water resistant than expected, especially considering the pigment inks from my printer should be more water resistant. I have produced more water resistant prints on other papers where I have seen others say water washed the ink nearly completely off. So perhaps this product is somehow formulated to be more water resistant with dye based inks rather than pigment based inks.Lastly, in case anyone else out there is looking for sticker paper for making playing card games, my cards using these vinyl stickers did not slide against each other any better than most regular paper. My current method for making them work is rubbing them for a few seconds with the wax paper backing removed from sticker paper, which worked just as well with this product, though I'm not sure if I used its own backing or one of the others I had laying around.In conclusion, I would say this product mostly does what it says it does, and if you are looking for a matte adhesive paper that prints with close to photo paper quality, this could work for you. It just wasn't quite perfect for my project. It's also a bit expensive for my project since I could more or less achieve the same quality of card at a lower cost by using a cheaper matte photo paper for the front with a low quality sticker paper for the back. I'm sure I can use it for some other project though.

This is some nice paper. I've not tried other brands to compare but if they are all like this then wow. Ink holds up well. I tried handing washing a print and the ink manage to stay on with just hand washing. I decided to soak the print in water overnight and by the next morning, only the color print was gone and the black outlines from my image still remained. I was pretty impressed. I decided to soak it another night with Dawn dish washing soap and the printed black ink remained. I suppose depending on what kind of ink you use can improve the life of the prints even longer. Just for kicks, I even sprayed it with 91% alcohol and it did well with just black. I just used a generic inkjet printer and was still pleased with results. I imagined these would make great clothing or plushie tags simply by just folding the adhesive together and sewing it right onto your fabric project. Just an idea. Would save a lot of money on making personalize tags and in my opinion might even be better. Paper itself feels sturdy and I was able to peel and restick on multiple surfaces many times. I like it, would recommend and buy again. Thank you.

My stickers turned out great. I decided to test one for water resistance and it smudged when rubbed with a damp cloth. I like the stickers anyway, but will avoid getting them wet. I just used an HP inkjet printer and was surprised at the quality of the stickers.

prints well, backing sheet is quite thick, best to use rear tray setting if you have one. sticker quality is good

Debo admitir que tenía algo de miedo que fuera a quedar un resultado de baja calidad, pero no fue así. Los colores quedan muy bien, la aplicación es sencilla y sorprendentemente rápida, y duran hasta 48 hrs puestos sin problemas... Sin duda volveré a comprarlo

I actually bought this a few months ago and I decided to take it out and use it to make stickers for my nieces and my book promotion stickers. I was really impressed from the look and feel of the product after printing. They look and feel like store bought stickers and the material cuts easily. I like that the background paper is blank and does not have any print text so it makes it look more professional when making stickers. I used an Epson XP-7100 on fine print settings. I would highly recommend this product. I just bought a few more packs and I will tell you how the glossy one looks after I try them out!

This paper is so high-quality. I use it for my sticker shop (Macrado shop on Etsy) and people love it so far. No smudges, instant dry, and I don’t know if it’s mentioned in the description but it’s waterproof. I had to try it myself because no one else had mentioned it and I needed to know before I started selling them.

Ho stampato degli adesivi con il logo della mia radio e ho usato una stampante a getto epson non di "primo pelo". Il risultato è incredibile!!Ottimo prodotto