WARN 11690 Standard Manual Hubs

My son needed these for his new (to him) 2002 F350. These went right in and worked as expected. They are solid - much better than the plastic garbage that was in there, and they look GREAT!

Works nice and smooth, a great upgrade.

Simple to install and absolutely rock solid. 10/10!

Perfect upgrade for our 2004 F250 Powerstroke truck. The factory vacuum actuated hubs are difficult for me to keep in operating condition. Any number of things can cause failure including a solenoid, seals, etc. These premium hubs are straight forward and reassuring. Drastic difference is that my 4wd actually works now. Tried to take tight turns while in 4wd and experienced the appropriate hop/binding sensation associated with the front and rear axles fighting each other after locking the hubs and switching to 4wd in the cab. This is normal and verified you’re in 4wd. Don’t try it on pavement as it isn’t good for the system. For those of you wondering, cap off vac lines at the solenoid mounted on the passenger side under fender near the vac pump. Leave the vac lines plugged in down below (as they come from the factory) to keep water and dirt out. Easy peasy. If it’s snowy and/or you’re going to be using 4wd frequently for a period of time, you can leave the hubs locked to avoid having to get out of the truck when switching to 4wd inside the cab. My only complaint is that the hubs are a little shorter than the hub cap. Funny enough, I saw a brand new F250 with factory auto hubs and they were shorter than the factory hub caps too. Not a big deal. Picture posted.

It’s from Warn. Don’t need to mention quality, durability & functionality. I am glad I purchased this, it looks great on my truck! Super easy to install by myself.

They're the best hubs you can get on the market.. yes a little spendy buy they will out last the life time of any vehicle they are put on.. my hubs where Locked like I was in 4 wheel drive but once I put them on my problem was gone.. I highly recommend these hubs for any 4 wheel drive vehicle.. they are hands down top quality materials.. will buy again in a heartbeat for any of my future trucks..

These are fantastic. So much better than factory plastic ones

Hub have been on for half a year, and have used them several times. Have worked every time. Super simple to install, your 4 year old could do it these days!! Took about 20 minutes, for my 2004 350. I hadn't ever done hubs before, (not a mechanic), and you don't need to be. The instructions are pretty crappy however, but glanced at them and they helped. Only thing is they do not sit flush with the wheel cover, but only affects appearance, not how well they perform. Only tool that is needed is an alan wrench for the cap.