Keyless Entry Remote Control Key Fob Replacement Fits for Chevy Cruze Equinox Camaro Impala Malibu Sonic Buick Regal Verano Encore Allure Lacrosse GMC Terrain 2010-2021 OHT01060512 13504200

Works as intended. All buttons work. Easy programming. I drove with my old key like normal, then when I got home I inserted the cutkey fob and it just works.

Worked perfectly. Easy to program (google it... it took about 10 seconds, but you need a good key fob also to program). Better yet, since the key blank is held in with a rolled pin, it was easy to disassemble, remove the key blank, and insert the OG key (took about 10 minutes). All in all, no additional cost other than the fob itself.

I brought this to see if it would work on my car and when I got it I went to the dealership and it only cost me 25 dollars to get it cut for my car so it got programed by using my original key to start the car first then take out the original key and put in the key cut key and it locks and unlocks and pops the trunk so I would recommend it to anyone who has a chevrolet camaro car that only has 4 buttons for the car!

This is a replacement for the 1st fob I ordered, which I returned due to the "Lock" button being permanently pressed in when I received it (obviously a used/returned item). Amazon did replace it with one that seems to be new/unopened. After testing all the buttons, the "Lock" button does not seem to have the same audible "click" like the other buttons when pressing it, which seems to be a defect in the manufacturing process. However, I need a spare key, so instead of returning it, I took my original key from my broken fob and swapped it to the new keyfob. Programming was very simple...use a working key & fob (do not start the engine), turn the key until lights on dash come on and then go off by itself , then remove the key/fob, and within 5 seconds, insert the new, unprogrammed keyfob, turn the key until the dash lights come on then go off. Then, start the engine, I let my engine run for about a minute or so. The new fob should now be programmed to work the trunk and doors. If you do it this way, there is no need to have a new key lasercut. Note: when placing your old lasercut key into the new fob, you may have to spin the laser cut key counterclockwise once to put tension on the spring, then carefully close up the fob. This will insure that your key will "snap out" from the fob correctly. I used all the "key" parts from my old fob for proper fitment. You tube videos are helpful too.

The buttons on our old key fob broke last year so we bought this one. We opened it up, replaced the black key with our original, and connected it to the car. It worked okay, but we had to replace the battery within 2 months.13 months later the unlock button broke, the battery is dying, and the fob keeps popping open.Tldr: It's a better deal than a mobile locksmith ($200-$300 CA), even better if you replace the key yourself. You'll probably have to replace the batteries and it will last a year if you're lucky.

This was a nice product and easy to program too. Cost 65.00 to cut worked with no problem.

Good but about three months after buying it the buttons started bubbling up and now the unlock button won’t stay down and it takes me a couple minutes to get my car to unlock.

Excelente