TOP AND STANDARD FIX, SHORT/MIDDLE/LONG PROJECTION D Shape One Button Quick Release Soft Close White Toilet Seat (SHORT COMPACT PROJECTION)

A good value duraplastic toilet seat with smooth soft closing mechanism that is easy to install and remove for cleaning.

Short Projection Compact D Shape One Button Quick Release Soft Close White Toilet SeatI went of the measurements given on the advert on Amazon (click the link) it actually only gives the dimensions of the lid, not the seat.So for those who want the seat measurements they are 350mm wide and the length measured from the centre line of the 'hinge' is 400mmThese are the more important measurements because the seat is down and that's what you see most of the time.There is lots of adjustment so the seat can be moved forward to reach the front of the porcelain and very easy to centralise. On my toilet seat width there was approx 5mm per side porcelain on show, with the lid down the porcelain was covered completelyThe product itself is excellent, very strong and sturdy, easy to fit and the one press button to lift the whole seat off for cleaning is so easy to do.The fittings you get in the pack give you the option to either fit in the conventional way with nut underneath, or you can fasten it from the top putting what is basically a flexible 'push in' rawl plug that you push into the holes in the porcelain, and simply fasten the hinge assembly with a standard screwdriver from the top. Couldn't be easier. If the product measurements suit your needs, then go for it, the quality and price is well worth it.By the way at time of writing this review this exact seat is 10p short of £47 delivered from Victorian plumbing (£19 cheaper on Amazon)

Bought this to replace an Ideal Standard toilet seat. The original IS seat and an eventual replacement never worked well, quickly lost their self close and couldn't be kept tightly fixed to the pan. This seat isn't exactly the same shape as the IS seat but it's close enough. Much easier to fit than the IS seat, although the instructions are a little sketchy, but take your time, look at the illustrations and it should become obvious what's required (to be honest I'm actually still not sure what the difference is, ultimately, between the two different fixing methods - I just picked the one that was most like the existing). The main thing I think is not to forget to put the clear rubber washers into the underside of the hinge pillars before fixing. Great then just to be able to slot the seat onto the pillars, with the soft close mechanism contained within the seat rather than exposed as it was on the IS seat. Obviously, you need to lift the seat off again to tighten the pillars and add the chrome covers. Working great so far with a nice slow close (you don't have to stand and watch it if you don't want to!) and seems reasonably substantial and robust. Not exactly cheap, but still almost half the price of the seat it replaced. I'm only giving it 4 stars because, as others have observed, time will tell whether it continues to work well - if it's still working in 6 months I'l add a star!

Great difficulty finding a replacement toilet seat to fit my ultra tiny toilet but this one is perfect. Do measure before ordering. It may not be not quite the right shape but looks great and fits the pan in both length and width. Really easy to fit and well designed with both soft closure and quick release mechanism for cleaning. The stainless steel fixings will hopefully last longer than chrome. Saved me having to replace the entire toilet for the sake of a nasty scratch on the seat cover.

This is a great toilet seat, strong, rugged and looks great. Soft close is excellent, and the quick release idea is very useful.Unfortunately, I have to mark it down 2 stars:1.,) Measurement: I measured the toilet length from the mid-point of the screw holes to the front of the pan, and based on the measurements opted for the short seat. What I didn't realise, is that - (a) depending on the width of the screw holes, the actual position of the pan mounts could be +/- 1.2cm. (b) That the measurement is for the lid of the pan, and not the actual seat which is perhaps 1cm shorter, (c) that when the lid is lifted up, there appears to be a little play, and the seat slides back a few mm. The result is that the seat despite being the right measurements, is almost 1.5cm-2cm too short, and looks too small2.) Fittings. It comes with fittings for both top and bottom fed fittings. I didn't want to over-tighten the screws, but needed to tighten them enough to stop movement in the seat. Unfortunately by doing so, the screw head starts to pull into the mount, and the mounting bar (Vertical bar that the toilet seat clicks into) started to bend . I.e. is no longer properly vertical. This made it very difficult to clip the seat on.It's a real shame, as this is a good toilet seat,