Universal TV Stand, Table Top TV Stand Base Replacement for Most 37 to 86 Inch LCD LED TVs, 7 Height Adjustable TV Legs with Cable Management Hold up to 150lbs, Max VESA 800x600mm, Black AX10TB01

A godsend indeed. I purchased a 75 inch tv and it when it arrived it was way to heavy for my comfort level to be mounted on the wall(plus I couldn’t lift it). I searched around online for a replacement option and found this-the reviews were mixed but I found someone with the same model as me (insignia f50) and I said if it worked for them it had to work for me.When I received the stand I realized I have a different tv(maybe newer not sure but I just changed the placement of the screws and continued with assembly. My kids flipped it over onto the table and initially it slid around (no one put on the grips-THEY MATTER) but after adding the grips it’s been standing stong.So glad I found this because I didn’t want to have to buy a completely new table for a tv.Now thinking about adding these to other tvs I have mounted. Highly recommend the price is the best you can find for any tv stand. It is very sturdy and I’m able to place a 15inch monitor in front of it without blocking any of the tv.

This stand is excellent: Strong, simple, easy to assemble and looks to fit most VESA-compatible TV's. That's a lot of plusses for such an inexpensive stand. It mounted easily to my new Hisense 85" in just a couple of minutes, looks & feels solid/great.

Easy installation and very sturdy! Perfect option for apartment living or areas where you do not want a wall mount. Great price!

Sturdy: 4/5 so farEase of putting together: 4/5Available materials: 4/5Used for my older 2020 Samsung Frame.Used the: metal washers, spacerScrews: The M8 X 45 was too long & the M8 x 20 was too small. Went to ACE hardware and got the size in-between.All in all it works.

Really good deal for what you get very, very sturdy easy to assemble. All the hardware is included. Easy to adjust the height. Looks great.

Perfect for 75 in tv

Item came well packaged, the legs are very sturdy made from thick steel. I mounted a 85 screen tv about 150lb and no wobbly feel

The media could not be loaded. I had to move a very lightweight Insignia 37 inch Fire TV from a standard height TV table/stand to a desk table located at the foot of a guest room bed and raise the TV a few inches so it will be watchable. See attached photo. The factory legs install points were wider than the new table location. See attached photo. The factory TV legs only has about a two inch gap from the bottom of the TV to the table surface.Some reviewers are happy with this product, some are not. I am not. Here is the good and bad based on my experience...***** THE GOOD *****The stand arrived well packaged in a thick cardboard box. See photos.The stand comes with an assortment of mounting screws, washers, spacers and a cable management clip. See attached photo. My TV came with its own mounting screws which I used. I did not need any spacers or washers. To be fair all TVs are not made alike so the supplied screws may or may not work for you. In addition to thread size the most important part is the correct screw depth (not too long) to avoid damage to the TV. If not sure of the correct screw thread and depth contact the TV manufacturer. The following metric screws are supplied:M4x12M6x12M6x30M8x20M8x45Assembly is straightforward and not difficult. Printed instructions are included. All mounting holes lined up perfect. A 3mm Allen wrench is included if you need it. There were no defective hole threads. See this review “The Bad” section on screw quality.The feet has for rubber adhesive pads included, but not factory installed. The stand will stay in place on most surfaces, will not slide and will require the entire TV to be lifted to move it around the table surface. An alternative it is use adhesive felt pads or other material. In any case something must be attached to the feet to protect the table surface from damage. I have no problem with this except as noted in this review “The Bad” section.The height selections should be sufficient for most people. The stand would have worked for my 37 inch TV without using the upper part of the vertical mount. The distance from the bottom of the TV to the table would have been about a four inch gap. Since I needed raise the TV at least eight inches or more I used the upper mount part.***** THE BAD *****First the screw quality. The screws are poor quality and made of somewhat soft metal and can easily strip. Instead of using the supplied 3mm Allen wrench which can be PIA for many screws I used a socket wrench with a 3mm male socket. I've done many DIY projects over the years and understand about not over tightening and possibly striping screws. I decided to tighten the first screw just a hair more and it started to strip. Luckily I caught this in time.CAUTION!!! Tighten the screws just enough where they will not easily move. Another reviewer noted that the one of the screws attaching the stand to the TV stripped. Bad news. As a comparison I used the mounting screws supplied by my TV manufacture (Phillips head) which are good quality. I was as able to get a tight connection with ease and without deforming any part of the screw heads.Suggestion: many manufactured products are notorious for supplying low quality screws. Since the screws attaching the stand to the TV is a critical connection, whether using this stand or another brand determine the the thread size, length, purchase known quality screws and use those instead.Here is the deal breaker...I used just two fingers and lightly put pressure on the side of the TV. The stand legs started to flex making the stand unstable. My TV is a lightweight 37 inch. I could imagine the results for a larger heaver TV. See attached video.My thoughts are the main reason for the stability issue is there is no horizontal support. A horizontal piece could have been added to the stand behind the TV and another between the stand feet. The distance between the feet is determined by the horizontal distance between the mounting screws. My TV mounting points are VESA 200x200 which is about eight inches. See attached photo.