Croydex Shower Head and Hose Mixer Set with Riser Rail - 1.5m Shower Hose and Handset with Rub Clean Nozzles, Easy Install Wall Mounted Rail for Bathrooms - Ideal Hot & Cold Water Mixer (Chrome)

This was actually a good buy.I wanted a shower but tried to have one fitted but because of my awkward bathroom, there was always some problem.Saw this and thought let’s give it a go.To my surprise it actually works well and gives you that shower fresh feel. Easy to fit, initially a little leakage but once it was played around with by tightening here and there, it works perfectly.Easy to clean also .

We have had 3 of these over the years as opposed to getting a fixed mixer fitted and needing to re tile the bathroom. They last about 3 years due to the seals breaking down but for the price and quality used twice a day every day they are still value for money.Good pressure but upon fitting them use a socket and not a screwdriver as it will create a leak proof seal.

Worked for a couple weeks, having to retighten c-clamps each use, thing just constantly leaks and from the joints itself, making more of a wet mess around the floor. Used a combination of waterproof tape, sealant to make do… Waste of time otherwise. Wish I just replaced the taps with shower mixer instead

I recently installed the Croydex Bar Mixer Shower Set with a 1500mm flexi-tube hose, and overall, I am quite pleased with its performance. Here's my detailed review:Design and Build QualityThe chrome-plated finish of the shower set gives it a sleek and modern look that fits well in any bathroom. The materials used feel robust and durable, ensuring longevity. The riser rail is sturdy, and the shower head, although basic with its one function, delivers a consistent and satisfying water flow.Ease of InstallationOne of the standout features of this shower set is its ease of installation. The instructions were clear and straightforward, making the setup process quick and hassle-free. ***It's designed to be compatible with round taps, which added to the convenience.***PerformanceThe shower performs admirably, providing a steady and comfortable water pressure. The 1500mm flexi-tube hose is a good length, allowing for ample movement and flexibility. While the one-function shower head is somewhat limiting, it serves its purpose well for a standard shower experience.Value for MoneyConsidering the quality, ease of installation, and performance, this shower set offers good value for money. It's a practical and efficient choice for those looking to upgrade their bathroom without breaking the bank.Overall SatisfactionOverall, the Croydex Bar Mixer Shower Set is a solid choice for anyone seeking a reliable and easy-to-install shower solution. Its simplicity and functionality make it a great addition to any bathroom, though those looking for more advanced features might find the single-function shower head somewhat limiting. Nonetheless, it delivers well on its promises and has left me a satisfied customer.******Please Be mindful if your having a shower,that no one turns a tap on in a different room or flush a toilet because you could get burned with hot water******Highly recommended for its straightforward installation and solid performance.

Great product, I am 100% happyI am disabled, with a damaged lower spine and arthritis so not able to pull out the bath to add mixer taps and fit a proper shower, I would have had to remove and refit the toilet and a lot of plumbing which is preventing removal of the bath also...Lots of cash and lots of work...For me, This product is a complete blessing under the circumstances, just £30... and not a lot of work to install (even in my condition)I bought some silicon sealant, expecting to have trouble making it water tight, because I have fairly square shaped taps, and one reviewer posted a pic of the same type and stated that it did not fit them...Mine sealed without the use of any added sealant or tape etc, and can withstand reasonable and sufficient pressure, so don't be put off by some of the negative comments...Method used (and recommended) = apply the mixer to taps - tighten up clips fully - add the shower nozzle - run the hot tap on low pressure to heat up the rubber seals (spraying the hot water onto the cold side seal with the shower head)... once both seals are heated up and softened, tighten the jubilee clips again as tight as you can...fix the rail to wall with 2x screws + wall plugs.Leave the 2x covers off of the mixer for a few days, and then tighten some more (if you can, or if needed) after settling.Then add the seal covers...All done!You will need a drill and masonry bit for fixing the shower rail, 1 x very small Philips screwdriver and 1 x large (good fit essential) for the mixer.... and a pencil to mark the drill holes ;D(sturdy ratchet/screwdriver set with a 7mm socket recommended)2x screws and wall plugs are provided, but I used a larger size to be sureextra tip = make sure the jubilee clip lugs are facing upwards on both sides, this will make tightening them easier ;D

Update: Unusable after 1 year. Started to lose water pressure after 6 months. Now it's impossible to shower because hot water isn't coming out when shower is switched on, even though there is no leaks. Unscrewed the whole thing and the inside is absolutely disgusting. Not a long term solution.The packaging is very difficult to cut open. Bit hard to assemble but after reading some reviews managed to get leakage to a minimum. The cold tap still leaks more than the hot one but does the job. Probably have to tighten the screws every so often. Look stylish and love the fact that it's easy to switch between shower and bath outlet. Very convenient design. Had been using for over 2 months and it's doing well.