- Easy to use; 40 pump strokes creates a powerful vacuum - no electricity needed.
- Fast - just a few seconds to drain oil from a small engine, takes a few minutes for large engines.
- 8 quart capacity for big project large engine changes or multiple small engine changes.
- Portable compact size, allows for easy oil changes in tight spaces.
- No mess from spills or inconvenient drain plugs - used oil and other liquids are stored safely for proper disposal.
Product Description
-------------------
Changing engine oil can be messy, time consuming and there is no
good way to dispose of old oil. The LiquiVac is a new user
friendly and environmentally safe oil changing system. It is
fast, convenient and eliminates mess and clean-up. The LiquiVac
works by creating a powerful vacuum that draws the used oil out
of the engine and into a holding tank for easy disposal to a
recycling center. Simply insert the extraction hose into the
dipstick tube, pump the handle 40 times, release the hose clamp
and LiquiVac extracts the oil directly into its plastic holding
tank. Works great for boats, cars, trucks and more. USA
dimensions: 16 inch length x 7 inch width x 11 inch height, tank
size: 8 gallon, suction hose length 48 inches.
.com
----
Changing engine oil can be messy, time consuming and it is
difficult to dispose of old oil. The LiquiVac is a user friendly
and an environmentally safe oil changing system. It is fast,
convenient and eliminates mess and clean-up. The LiquiVac works
by creating a powerful vacuum that draws the used oil out of the
engine and into a holding tank for easy disposal to a recycling
center. Simply insert the extraction hose into the dipstick tube,
pump the handle 40 times, open the cap’s valve and LiquiVac
extracts the oil directly into its plastic holding tank. It works
great for boats, cars, trucks--and small engines too.
Quickly change the oil in large engines--works with small
engines too
Cars and Trucks Oil Change
--------------------------
The LiquiVac Oil Changing System for Large Projects and Engines
makes car oil changes quick, clean, and easy. This is especially
true with hard to access drain plugs found in large engines.
An average car or truck takes approximately 8-10 minutes to
extract the oil, and without a mess. The Large Engine/Project
Model comes with a special narrow suction hose to fit dipstick
tubes of boats, cars, and light trucks. Plus, its tank has an 8
quart capacity allowing the user to make multiple oil changes of
small engines too.
Boats
-----
The LiquiVac innovative design makes it easier to change the oil
in engines such as boats with inaccessible drain plugs. The Large
Engine/Project Model comes with a special narrow suction hose to
fit dipstick tubes to make your 4-cycle outboard oil change and
inboard oil change easy. Also, don’t forget the LiquiVac makes
boat transmission changes very easy.
Small Engines: Lawnmowers, Generators, Power Washers, Snow
Throwers, and More
-----------------------------------------------------------------
Small engines seem to be the most ignored engines that a consumer
owns. This has occurred because there are consumers who have
their car oil serviced at the quick lube places. And, have
entirely forgotten that all the small engines in their garages
need their oil changed too. Unfortunately this neglect can be
very costly since these engines run very hard and in dusty
conditions, which can lead to dirty, grimy oil and, eventually,
engine breakdowns.
With the LiquiVac small engine oil changes are a snap. This
vacuum is powerful enough to extract used oil out through the
dipstick/fill tube in just 14 seconds. (Extraction time is based
on the typical 4-cycle engine containing 1 quart of oil). With
this kind of powerful performance and ease of use the LiquiVac
Small Engine Model takes maintenance on 4-cycle engines super
simple.
Which Model of LiquiVac Is Right for You?
-----------------------------------------
LiquiVac Small Engine Model
Small Engine Model
------------------
Small engines seem to be the most ignored engines that a consumer
owns. This has occurred because there are consumers who have
their car oil serviced at the quick lube places. And, have
entirely forgotten that all the small engines in their garages
need their oil changed too. Unfortunately this neglect can be
very costly since these engines run very hard and in dusty
conditions, which can lead to dirty, grimy oil; and, then engine
breakdowns.
But, now there’s a simple, fast and clean way to change your lawn
and garden equipment’s oil. It’s the LiquiVac Oil Changing
System. With the LiquiVac oil changes are a snap. The LiquiVac
Small Engine Model works by creating negative pressure, or vacuum
power in the tank by pumping the tank handle. Each pump stroke
takes air out of the tank creating a vacuum. Just 20 quick pump
strokes creates vacuum power in the tank. This vacuum is powerful
enough to extract used oil out through the dipstick/fill tube
with the release of the suction hose clamp, in just 14 seconds.
(Extraction time is based on the typical 4-cycle engine
containing 1 quart of oil). With this kind of powerful
performance and ease of use the LiquiVac Small Engine Model takes
maintenance on 4-cycle engines very easy. Perfect for lawn
mowers, lawn & garden tractors, tillers, generators, snow
throwers, ATVs and outboard motors as well as.
LiquiVac Large Project/Engine Model
Large Project/Engine Model
--------------------------
It is called the Large Project/Engine Model for a reason. Its 8
quarts capacity is large enough to handle several oil changes at
one time, without recycling/emptying it. For example you can
change your boat engine and several small engines in one session.
Because of this, many do-it-yourself people love to knock out
their oil change projects in one fell swoop. They can do it fast,
without the mess. Plus, the Large Project and Large Engine Model
works great for large engines such as hard to change boats
(inboards and outboards), trucks, and cars too. It is also very
handy for to change transmission oil and hydraulic fluids too.